Re: [PATCH v8 3/10] Documentation: devicetree: Update Samsung FIMC DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tuesday 11 March 2014 17:34:30 Sylwester Nawrocki wrote:
> This patch documents following updates of the Exynos4 SoC camera subsystem
> devicetree binding:
> 
>  - addition of #clock-cells and clock-output-names properties to 'camera'
>    node - these are now needed so the image sensor sub-devices can reference
> clocks provided by the camera host interface,
>  - dropped a note about required clock-frequency properties at the
>    image sensor nodes; the sensor devices can now control their clock
>    explicitly through the clk API and there is no need to require this
>    property in the camera host interface binding.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>

Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> Changes since v7:
>  - dropped a note about clock-frequency property in sensor nodes.
> 
> Changes since v6:
>  - #clock-cells, clock-output-names documented as mandatory properties;
>  - renamed "cam_mclk_{a,b}" to "cam_{a,b}_clkout in the example dts,
>    this now matches changes in exynos4.dtsi further in the patch series;
>  - marked "samsung,camclk-out" property as deprecated.
> 
> Changes since v5:
>  - none.
> 
> Changes since v4:
>  - dropped a requirement of specific order of values in clocks/
>    clock-names properties (Mark) and reference to clock-names in
>    clock-output-names property description (Mark).
> ---
>  .../devicetree/bindings/media/samsung-fimc.txt     |   44 +++++++++++------
>  1 file changed, 29 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt
> b/Documentation/devicetree/bindings/media/samsung-fimc.txt index
> 96312f6..922d6f8 100644
> --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
> +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
> @@ -15,11 +15,21 @@ Common 'camera' node
> 
>  Required properties:
> 
> -- compatible	: must be "samsung,fimc", "simple-bus"
> -- clocks	: list of clock specifiers, corresponding to entries in
> -		  the clock-names property;
> -- clock-names	: must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
> -		  "pxl_async1" entries, matching entries in the clocks property.
> +- compatible: must be "samsung,fimc", "simple-bus"
> +- clocks: list of clock specifiers, corresponding to entries in
> +  the clock-names property;
> +- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
> +  "pxl_async1" entries, matching entries in the clocks property.
> +
> +- #clock-cells: from the common clock bindings
> (../clock/clock-bindings.txt), +  must be 1. A clock provider is associated
> with the 'camera' node and it should +  be referenced by external sensors
> that use clocks provided by the SoC on +  CAM_*_CLKOUT pins. The clock
> specifier cell stores an index of a clock. +  The indices are 0, 1 for
> CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively. +
> +- clock-output-names: from the common clock bindings, should contain names
> of +  clocks registered by the camera subsystem corresponding to
> CAM_A_CLKOUT, +  CAM_B_CLKOUT output clocks respectively.
> 
>  The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be
> used to define a required pinctrl state named "default" and optional
> pinctrl states: @@ -32,6 +42,7 @@ way around.
> 
>  The 'camera' node must include at least one 'fimc' child node.
> 
> +
>  'fimc' device nodes
>  -------------------
> 
> @@ -88,8 +99,8 @@ port nodes specifies data input - 0, 1 indicates input A,
> B respectively.
> 
>  Optional properties
> 
> -- samsung,camclk-out : specifies clock output for remote sensor,
> -		       0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
> +- samsung,camclk-out (deprecated) : specifies clock output for remote
> sensor, +  0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
> 
>  Image sensor nodes
>  ------------------
> @@ -97,8 +108,6 @@ Image sensor nodes
>  The sensor device nodes should be added to their control bus controller
> (e.g. I2C0) nodes and linked to a port node in the csis or the
> parallel-ports node, using the common video interfaces bindings, defined in
> video-interfaces.txt.
> -The implementation of this bindings requires clock-frequency property to be
> -present in the sensor device nodes.
> 
>  Example:
> 
> @@ -114,7 +123,7 @@ Example:
>  			vddio-supply = <...>;
> 
>  			clock-frequency = <24000000>;
> -			clocks = <...>;
> +			clocks = <&camera 1>;
>  			clock-names = "mclk";
> 
>  			port {
> @@ -135,7 +144,7 @@ Example:
>  			vddio-supply = <...>;
> 
>  			clock-frequency = <24000000>;
> -			clocks = <...>;
> +			clocks = <&camera 0>;
>  			clock-names = "mclk";
> 
>  			port {
> @@ -149,12 +158,17 @@ Example:
> 
>  	camera {
>  		compatible = "samsung,fimc", "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		status = "okay";
> -
> +		clocks = <&clock 132>, <&clock 133>, <&clock 351>,
> +			 <&clock 352>;
> +		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
> +			      "pxl_async1";
> +		#clock-cells = <1>;
> +		clock-output-names = "cam_a_clkout", "cam_b_clkout";
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&cam_port_a_clk_active>;
> +		status = "okay";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> 
>  		/* parallel camera ports */
>  		parallel-ports {


-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux