On Mon, Oct 22, 2018 at 11:27:23AM +0200, Alex Gonzalez wrote:
> The wireless variants of the ConnecCore 6UL SOM include a Qualcomm
> QCA6564 wireless chip with dual WiFi and Bluetooth.
>
> Both the ConnectCore 6UL SBC Express and Pro boards fit a wireless SOM.
>
> The Wifi is connected through the SDIO interface on usdhc1 and the
> Bluetooth is connected via uart1.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@xxxxxxxx>
> ---
> arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 64 +++++++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
> index c71a84da1af0..23bbcd4c71d1 100644
> --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
> +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
> @@ -161,6 +161,25 @@
> };
> };
>
> +/* UART1 (Bluetooth) */
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +/* USDHC1 (Wireless) */
> +&usdhc1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
> + pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
> + non-removable;
> + no-1-8-v;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> &iomuxc {
> pinctrl_gpmi_nand: gpmigrp {
> fsl,pins = <
> @@ -188,6 +207,51 @@
> MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> >;
> };
The existing indentation for gpmigrp and i2c1grp is problematic.
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> + MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x1b0b1
> + MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b1
> + >;
> + };
This indentation is what we want ...
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17051
> + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
> + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
> + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
> + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
> + >;
> + };
> +
... so please follow uart1grp style for all entries you are adding.
Shawn
> + pinctrl_usdhc1_sleep: usdhc1grp-sleep {
> + fsl,pins = <
> + MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000
> + MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000
> + MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x3000
> + MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x3000
> + MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x3000
> + MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x3000
> + >;
> + };
> +
> + pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x08a0
> + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x08a0
> + >;
> + };
> +
> + pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000
> + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000
> + >;
> + };
> };
>
> ®_arm {
