Horizontal back porch, sync active and sync end bits are
needed to enable for burst mode panel operations.
So, enable them via dsi base control register.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 2d34e5f48d29..feb8c54c5146 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -518,6 +518,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
u16 hbp, hfp_pkt_overhead, hfp, hsa, hblk, vblk;
size_t bytes;
u8 *buffer;
+ u32 val = 0;
/* Do all timing calculations up front to allocate buffer space */
@@ -527,6 +528,10 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
hblk = mode->hdisplay * Bpp;
hfp = 0;
vblk = 0;
+
+ regmap_read(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, &val);
+ val |= SUN6I_DSI_BASIC_CTL_HBP_DIS;
+ val |= SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS;
} else {
/*
* A sync period is composed of a blanking packet (4 bytes +
@@ -594,7 +599,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
if (WARN_ON(!buffer))
return;
- regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, 0);
+ regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, val);
regmap_write(dsi->regs, SUN6I_DSI_SYNC_HSS_REG,
sun6i_dsi_build_sync_pkt(MIPI_DSI_H_SYNC_START,
--
2.18.0.321.gffc6fa0e3
