Re: [PATCH v2 4/4] ARM: dts: imx6sx: Add DISPLAY power domain support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/31/2018 8:12 AM, Shawn Guo wrote:
> On Mon, Oct 08, 2018 at 06:06:23PM +0000, Leonard Crestez wrote:
>> This was implemented in the driver but not actually defined and
>> referenced in dts. This makes it always on.
>>
>>  From reference manual in section "10.4.1.4.1 Power Distribution":
>>
>> "Display domain - The DISPLAY domain contains GIS, CSI, PXP, LCDIF,
>> PCIe, DCIC, and LDB. It is supplied by internal regulator."
>>
>> The current pd_pcie is actually only for PCIE_PHY, the PCIE ip block is
>> actually inside the DISPLAY domain. Handle this by adding the pcie node
>> in both power domains.
>>
>> Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
> 
> Applied, thanks.

As mentioned in the cover letter this requires multi-PD support in 
imx-pci to be implemented, specifically PATCH 3/4 of this series:

	https://lore.kernel.org/patchwork/patch/996810/

Unless that also gets merged soon via pci I expect issues in linux-next. 
The patch already has reviewed-by tags so "merging it soon" is not 
unreasonable.

Link to cover: https://lore.kernel.org/patchwork/cover/996807/

There is also an mxsfb dependency but that's already merged in 
torvalds/master.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux