Re: [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 29, 2018 at 06:39:30PM +0200, Stefan Popa wrote:
> Add support for Analog Devices AD7124 4-channels and 8-channels ADC.
> 
> Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx>
> ---
> Changes in v2:
> 	- Nothing changed.
> Changes in v3:
> 	- Removed the "adi,channels" property.
> 	- Used the "reg" property to get the channel number and "adi,diff-channels"
> 	  for the differential pins. The "adi,channel-number" property was removed.
> 	- adi,bipolar is of boolean type.
> 
>  .../devicetree/bindings/iio/adc/adi,ad7124.txt     | 90 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 91 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
> new file mode 100644
> index 0000000..46a9b71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
> @@ -0,0 +1,90 @@
> +Analog Devices AD7124 ADC device driver
> +
> +Required properties for the AD7124:
> +	- compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8"
> +	- reg: SPI chip select number for the device
> +	- spi-max-frequency: Max SPI frequency to use
> +		see: Documentation/devicetree/bindings/spi/spi-bus.txt
> +	- clocks: phandle to the master clock (mclk)
> +		see: Documentation/devicetree/bindings/clock/clock-bindings.txt
> +	- clock-names: Must be "mclk".
> +	- interrupts: IRQ line for the ADC
> +		see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> +
> +	  Required properties:
> +		* #address-cells: Must be 1.
> +		* #size-cells: Must be 0.
> +
> +	  Subnode(s) represent the external channels which are connected to the ADC.
> +	  Each subnode represents one channel and has the following properties:
> +		Required properties:
> +			* reg: The channel number. It can have up to 4 channels on ad7124-4
> +			  and 8 channels on ad7124-8, numbered from 0 to 15.
> +			* adi,diff-channels: Pins the channel is connected to. The first value
> +			  specifies the positive input pin, the second value the negative input pin.
> +
> +		Optional properties:
> +			* adi,bipolar: Boolean, if set the channel is used in bipolar mode.

Both this and Xilinx AMS which I just reviewed are defining a bipolar 
property. Can we come up with a common property please.

> +			* adi,reference-select: Select the reference source to use when
> +			  converting on the the specific channel. Valid values are:
> +			  0: REFIN1(+)/REFIN1(−).
> +			  1: REFIN2(+)/REFIN2(−).
> +			  3: AVDD
> +			  If this field is left empty, internal reference is selected.
> +			* adi,gain: Select the gain when converting on the specific channel.
> +			  Valid values are: 1, 2, 4, 8, 16, 32, 64, 128.
> +			  If this field is left empty, gain of 1 is selected.
> +			* adi,odr-hz: The output data rate can be programmed from:
> +			  9 to 19200 for full power mode (when the master clock is 614.4 kHz)
> +			  2 to 4800 for mid power mode (when the master clock is 153.6 kHz)
> +			  1 to 2400 for low power mode (when the master clock is 76.8 kHz)
> +			  If this field is left empty, odr of 9 is selected.
> +
> +Optional properties:
> +	- refin1-supply: refin1 supply can be used as reference for conversion.
> +	- refin2-supply: refin2 supply can be used as reference for conversion.
> +	- avdd-supply: avdd supply can be used as reference for conversion.
> +
> +Example:
> +	adc@0 {
> +		compatible = "adi,ad7124-4";
> +		reg = <0>;
> +		spi-max-frequency = <5000000>;
> +		interrupts = <25 2>;
> +		interrupt-parent = <&gpio>;
> +		refin1-supply = <&adc_vref>;
> +		clocks = <&ad7124_mclk>;
> +		clock-names = "mclk";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		channel@0 {
> +			reg = <0>;
> +			adi,diff-channels = <0 1>;
> +			adi,reference-select = <0>;
> +			adi,gain = <2>;
> +			adi,odr-hz = <10>;
> +		};
> +
> +		channel@1 {
> +			reg = <1>;
> +			adi,bipolar;
> +			adi,diff-channels = <2 3>;
> +			adi,reference-select = <0>;
> +			adi,gain = <4>;
> +			adi,odr-hz = <50>;
> +		};
> +
> +		channel@2 {
> +			reg = <2>;
> +			adi,diff-channels = <4 5>;
> +			adi,gain = <128>;
> +			adi,odr-hz = <19200>;
> +		};
> +
> +		channel@3 {
> +			reg = <3>;
> +			adi,diff-channels = <6 7>;
> +		};
> +	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3a1bfcb..f2fa508 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -845,6 +845,7 @@ L:	linux-iio@xxxxxxxxxxxxxxx
>  W:	http://ez.analog.com/community/linux-device-drivers
>  S:	Supported
>  F:	drivers/iio/adc/ad7124.c
> +F:	Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
>  
>  ANALOG DEVICES INC AD9389B DRIVER
>  M:	Hans Verkuil <hans.verkuil@xxxxxxxxx>
> -- 
> 2.7.4
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux