Replace the vague binding by a more verbose. Remove the remote property
from the example since the driver don't support such a property. Also
remove the bus-width property from the endpoint since the driver don't
take care of it.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/media/i2c/mt9m111.txt | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
index 6b910036b57e..921cc48c488b 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
@@ -9,8 +9,13 @@ Required Properties:
- clocks: reference to the master clock.
- clock-names: shall be "mclk".
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Required endpoint properties:
+- remote-endpoint: For information see ../video-interfaces.txt.
Example:
@@ -21,10 +26,8 @@ Example:
clocks = <&mclk>;
clock-names = "mclk";
- remote = <&pxa_camera>;
port {
mt9m111_1: endpoint {
- bus-width = <8>;
remote-endpoint = <&pxa_camera>;
};
};
--
2.19.1
