On Fri, Oct 26, 2018 at 9:43 PM Priit Laes <plaes@xxxxxxxxx> wrote:
>
> On Fri, Oct 26, 2018 at 08:13:39PM +0530, Jagan Teki wrote:
> > Techstar TS8550B MIPI DSI panel is 480x854, 2-lane MIPI DSI
> > LCD panel. Add panel driver for it.
> >
> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > Tested-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > Changes for v3:
> > - new patch
> > Changes for v2:
> > - none
> >
> > drivers/gpu/drm/panel/Kconfig | 9 +
> > drivers/gpu/drm/panel/Makefile | 1 +
> > .../gpu/drm/panel/panel-techstar-ts8550b.c | 346 ++++++++++++++++++
> > 3 files changed, 356 insertions(+)
> > create mode 100644 drivers/gpu/drm/panel/panel-techstar-ts8550b.c
> >
> > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > index 20b88c275421..d0d4e60f5153 100644
> > --- a/drivers/gpu/drm/panel/Kconfig
> > +++ b/drivers/gpu/drm/panel/Kconfig
> > @@ -195,4 +195,13 @@ config DRM_PANEL_SITRONIX_ST7789V
> > Say Y here if you want to enable support for the Sitronix
> > ST7789V controller for 240x320 LCD panels
> >
> > +config DRM_PANEL_TECHSTAR_TS8550B
> > + tristate "Techstar TS8550B MIPI-DSI panel driver"
> > + depends on OF
> > + depends on DRM_MIPI_DSI
> > + depends on BACKLIGHT_CLASS_DEVICE
> > + help
> > + Say Y if you want to enable support for panels based on the
> > + Techstar TS8550B MIPI-DSI interface.
> > +
> > endmenu
> > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > index 04696bb85218..88011f06edb8 100644
> > --- a/drivers/gpu/drm/panel/Makefile
> > +++ b/drivers/gpu/drm/panel/Makefile
> > @@ -20,3 +20,4 @@ obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
> > obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> > obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
> > obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> > +obj-$(CONFIG_DRM_PANEL_TECHSTAR_TS8550B) += panel-techstar-ts8550b.o
> > diff --git a/drivers/gpu/drm/panel/panel-techstar-ts8550b.c b/drivers/gpu/drm/panel/panel-techstar-ts8550b.c
> > new file mode 100644
> > index 000000000000..8baca71595a7
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panel/panel-techstar-ts8550b.c
> > @@ -0,0 +1,346 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2019, Amarula Solutions.
> > + * Author: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/backlight.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/err.h>
> > +#include <linux/errno.h>
> > +#include <linux/fb.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_modes.h>
> > +#include <drm/drm_panel.h>
> > +
> > +#include <video/mipi_display.h>
> > +
> > +struct ts8550b {
> > + struct drm_panel panel;
> > + struct mipi_dsi_device *dsi;
> > +
> > + struct backlight_device *backlight;
> > + struct regulator *dvdd;
> > + struct regulator *avdd;
> > + struct gpio_desc *reset;
> > +
> > + bool is_enabled;
> > + bool is_prepared;
> > +};
> > +
> > +static inline struct ts8550b *panel_to_ts8550b(struct drm_panel *panel)
> > +{
> > + return container_of(panel, struct ts8550b, panel);
> > +}
> > +
> > +static inline int ts8550b_dcs_write_seq(struct ts8550b *ctx, const void *seq,
> > + size_t len)
> > +{
> > + return mipi_dsi_dcs_write_buffer(ctx->dsi, seq, len);
> > +};
> > +
> > +#define ts8550b_dcs_write_seq_static(ctx, seq...) \
> > + ({ \
> > + static const u8 d[] = { seq }; \
> > + ts8550b_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \
> > + })
> > +
> > +static void ts8550b_init_sequence(struct ts8550b *ctx)
>
> This seems to be pretty "standard" MIPI-based display, utilizing
> bunch of manufacturer-specific commands during init sequence.
>
> Standard MIPI commands fall between 0x00..0xAF and are defined in <video/mipi.h>
Where is this file? we have include/video/mipi_display.h with
0x00..0xA8. Not all commands in sequence is listed in this, may be I
will update DCS commands macros and rest as-it-is. what do you think?
