From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
LIS3MDL and LSM9DS1 are missing BDU settings in their register maps, so add
them. I don't have a LIS3MDL sensor to test, but this works correctly on
the LSM9DS1, which has the same register map.
Signed-off-by: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
---
drivers/iio/magnetometer/st_magn_core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index a186b844d664..370b93db528d 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -316,6 +316,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
},
},
},
+ .bdu = {
+ .addr = 0x24,
+ .mask = 0x40,
+ },
.drdy_irq = {
/* drdy line is routed drdy pin */
.stat_drdy = {
--
2.11.0
