Re: [PATCH 2/3] dt-bindings: Add ICE device specific parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 17, 2018 at 08:47:55PM +0530, AnilKumar Chimata wrote:
> Add dt parameters information specific to the Inline
> Crypto Engine (ICE) device.
> 
> Signed-off-by: AnilKumar Chimata <anilc@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/crypto/msm/ice.txt         | 34 ++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/crypto/msm/ice.txt
> 
> diff --git a/Documentation/devicetree/bindings/crypto/msm/ice.txt b/Documentation/devicetree/bindings/crypto/msm/ice.txt
> new file mode 100644
> index 0000000..86eed5e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/msm/ice.txt
> @@ -0,0 +1,34 @@
> +* Inline Crypto Engine (ICE)
> +
> +Required properties:
> +  - compatible			: should be "qcom,ice"

Only 1 version ever? Probably not and this needs an SoC specific 
compatible string. Does this follow any standard or ICE is a QCom thing?

> +  - reg 			: <register mapping>

No need to define standard properties. You need to say how many register 
ranges.

> +
> +Optional properties:
> +  - interrupt-names     	: name describing the interrupts for ICE IRQ

No point to this if there is only 1 IRQ.

> +  - interrupts          	: <interrupt mapping for ICE IRQ>
> +  - qcom,enable-ice-clk 	: should enable clocks for ICE HW

This shouldn't be needed.

> +  - clocks              	: List of phandle and clock specifier pairs
> +  - clock-names         	: List of clock input name strings sorted in the same
> +				  order as the clocks property.

How many?  You need to give the 
> +  - qcom,op-freq-hz     	: max clock speed sorted in the same order as the clocks
> +				  property.

Use the assigned-clocks properties for this.

> +  - qcom,instance-type  	: describe the storage type for which ICE node is defined
> +				  currently, only "ufs" and "sdcc" are supported storage type

What if there is more than one instance of ufs or SD? Do you need to 
know which ICE goes with which controller?

> +  - power-domains		: regulator supply to be used by ICE HW
> +
> +Example:
> +	ufs_ice: ufsice@1d90000 {

crytpo@...

> +		compatible = "qcom,ice";
> +		reg = <0x1d90000 0x8000>;
> +		qcom,enable-ice-clk;
> +		clock-names = "ufs_core_clk", "bus_clk",
> +				"iface_clk", "ice_core_clk";
> +		clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> +			 <&gcc GCC_UFS_MEM_CLKREF_CLK>,
> +			 <&gcc GCC_UFS_PHY_AHB_CLK>,
> +			 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +		qcom,op-freq-hz = <0>, <0>, <0>, <300000000>;
> +		power-domains = <&gcc UFS_PHY_GDSC>;
> +		qcom,instance-type = "ufs";
> +	};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux