On Tue, Oct 16, 2018 at 06:42:17PM +0200, Lucas Stach wrote:
> This adds the DT binding for the Freescale IRQSTEER interrupt
> multiplexer found in the i.MX8 familiy SoCs.
>
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> ---
> .../interrupt-controller/fsl,irqsteer.txt | 39 +++++++++++++++++++
> 1 file changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> new file mode 100644
> index 000000000000..ed2b18165591
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> @@ -0,0 +1,39 @@
> +Freescale IRQSTEER Interrupt multiplexer
> +
> +Required properties:
> +
> +- compatible: should be:
> + - "fsl,imx8m-irqsteer"
> + - "fsl,imx-irqsteer"
> +- reg: Physical base address and size of registers.
> +- interrupts: Should contain the parent interrupt line used to multiplex the
> + input interrupts.
> +- clocks: Should contain one clock for entry in clock-names
> + see Documentation/devicetree/bindings/clock/clock-bindings.txt
> +- clock-names:
> + - "ipg": main logic clock
> +- interrupt-controller: Identifies the node as an interrupt controller.
> +- #interrupt-cells: Specifies the number of cells needed to encode an
> + interrupt source. The value must be 2.
> +
> +Optional properties:
> +- fsl,channel: Number of channels managed by this controller. Each channel
> + contains up to 32 interrupt sources. If absent defaults to 1.
What's a channel? Why isn't this implied by the compatible?
> +- fsl,endian:
The standard property for endianness doesn't work for you?
> + 0: controller registers are little endian
> + 1: controller registers are big endian
> + If absent defaults to 0.
> +
> +Example:
> +
> + interrupt-controller@32e2d000 {
> + compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
> + reg = <0x32e2d000 0x1000>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> + clock-names = "ipg";
> + fsl,channel = <2>;
> + fsl,endian = <1>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> --
> 2.19.0
>
