[PATCH 3/6] PCI: layerscape: Add the EP mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the EP mode support.

Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
---
 .../devicetree/bindings/pci/layerscape-pci.txt     |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 66df1e8..d3d7be1 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -13,12 +13,15 @@ information.
 
 Required properties:
 - compatible: should contain the platform identifier such as:
+  RC mode:
         "fsl,ls1021a-pcie", "snps,dw-pcie"
         "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
         "fsl,ls2088a-pcie"
         "fsl,ls1088a-pcie"
         "fsl,ls1046a-pcie"
         "fsl,ls1012a-pcie"
+  EP mode:
+        "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
-- 
1.7.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux