RE: [PATCH V1 3/3] ARM: dts: sabreauto: Add flexcan support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



-----Original Message-----
From: Fabio Estevam [mailto:festevam@xxxxxxxxx] 
Sent: 2018年10月24日 19:20
To: Joakim Zhang <qiangqing.zhang@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>; Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>; Sascha Hauer <kernel@xxxxxxxxxxxxxx>; Fabio Estevam <fabio.estevam@xxxxxxx>; dl-linux-imx <linux-imx@xxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@xxxxxxxxxxxxxxx>; linux-kernel <linux-kernel@xxxxxxxxxxxxxxx>; A.s. Dong <aisheng.dong@xxxxxxx>
Subject: Re: [PATCH V1 3/3] ARM: dts: sabreauto: Add flexcan support

Hi Joakim,

On Wed, Oct 24, 2018 at 8:15 AM Joakim Zhang <qiangqing.zhang@xxxxxxx> wrote:

> diff --git a/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts b/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
> new file mode 100644
> index 000000000000..963e0b559d60
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.

You can remove this paragraph as you are using SPDX tag.

> +++ b/arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */

Ditto.

> +&can1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_flexcan1>;
> +       pinctrl-assert-gpios = <&max7310_b 3 GPIO_ACTIVE_HIGH>; /* TX */

This property does not exist in upstream.


Hi Fabio,

I will modify what you have commented. Thanks a lot.

Best Regards,
Joakim Zhang




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux