Re: [PATCH anybus v1 2/4] dt-bindings: anybus-bridge: document devicetree binding.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 24, 2018 at 10:24:54AM -0400, Sven Van Asbroeck wrote:
> This patch adds devicetree binding documentation for the
> Arcx anybus bridge.
> 
> Signed-off-by: Sven Van Asbroeck <svendev@xxxxxxxx>
> ---
>  .../bindings/mfd/arcx,anybus-bridge.txt       | 37 +++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.txt   |  1 +
>  2 files changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/arcx,anybus-bridge.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/arcx,anybus-bridge.txt b/Documentation/devicetree/bindings/mfd/arcx,anybus-bridge.txt
> new file mode 100644
> index 000000000000..3c0399c4ed45
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/arcx,anybus-bridge.txt
> @@ -0,0 +1,37 @@
> +* Arcx anybus bridge
> +
> +This chip communicates with the SoC over the WEIM bus. It is
> +expected that its Device Tree node is specified as the child of a node
> +corresponding to the WEIM bus used for communication.

By WEIM you are referring to i.MX external parallel bus? Presumably this 
can work on any parallel bus, not just i.MX.

> +
> +Required properties:
> +
> +  - compatible : The following chip-specific string:
> +        "arcx,anybus-bridge"

No version or part number?

> +
> +  - reg :
> +	weim memory area where the cpld registers are located,	followed by:
> +	weim memory area of the first  anybus-s slot,		followed by:
> +	weim memory area of the second anybus-s slot.
> +
> +  - enable-gpios : the gpio connected to the bridge's 'enable gpio'.
> +
> +  - pwms : the pwm connected to the bridge's 'pwm input'.
> +
> +  - irq-gpios : the gpios connected to the bridge's interrupt lines.
> +	note that there is no need to provide the 'interrupts' property here.

Why not? This should not be base on what the OS currently happens to 
support.

What are the functions of each line? The order must be defined.

> +
> +Example of usage:
> +
> +&weim {
> +	bridge@0,0 {
> +		compatible = "arcx,anybus-bridge";
> +		reg = <0 0 0x100>, <0 0x400000 0x800>, <1 0x400000 0x800>;
> +		fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
> +				0x00000000 0xa0000240 0x00000000>;
> +		enable-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
> +		pwms = <&pwm3 0 571>;
> +		irq-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>,
> +					<&gpio1 5 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 2c3fc512e746..1bf07b20a8af 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -35,6 +35,7 @@ aptina	Aptina Imaging
>  arasan	Arasan Chip Systems
>  archermind ArcherMind Technology (Nanjing) Co., Ltd.
>  arctic	Arctic Sand
> +arcx	Arcx/Archronix Inc.
>  aries	Aries Embedded GmbH
>  arm	ARM Ltd.
>  armadeus	ARMadeus Systems SARL
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux