The patch spi: uniphier: fix incorrect property items has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 3511ba7d4ca6f39e2d060bb94e42a41ad1fee7bf Mon Sep 17 00:00:00 2001 From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx> Date: Wed, 24 Oct 2018 18:34:29 +0900 Subject: [PATCH] spi: uniphier: fix incorrect property items This commit fixes incorrect property because it was different from the actual. The parameters of '#address-cells' and '#size-cells' were removed, and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added. Fixes: 4dcd5c2781f3 ("spi: add DT bindings for UniPhier SPI controller") Signed-off-by: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- .../devicetree/bindings/spi/spi-uniphier.txt | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt index 504a4ecfc7b1..b04e66a52de5 100644 --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt +++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt @@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel. Required properties: - compatible: should be "socionext,uniphier-scssi" - reg: address and length of the spi master registers - - #address-cells: must be <1>, see spi-bus.txt - - #size-cells: must be <0>, see spi-bus.txt - - clocks: A phandle to the clock for the device. - - resets: A phandle to the reset control for the device. + - interrupts: a single interrupt specifier + - pinctrl-names: should be "default" + - pinctrl-0: pin control state for the default mode + - clocks: a phandle to the clock for the device + - resets: a phandle to the reset control for the device Example: spi0: spi@54006000 { compatible = "socionext,uniphier-scssi"; reg = <0x54006000 0x100>; - #address-cells = <1>; - #size-cells = <0>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; resets = <&peri_rst 11>; }; -- 2.19.0
