Add documentation to describe Xilinx ZynqMP fpga driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
---
Changes for v2:
-Removed "----" separators.
Changes for v1:
-Created a Seperate(New) DT binding file as
suggested by Rob.
Changes for RFC-V2:
-Moved pcap node as a child to firwmare
node as suggested by Rob.
.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..1f6f58872311
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,13 @@
+Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
+using ZynqMP SoC firmware interface
+For Bitstream configuration on ZynqMp Soc uses processor configuration
+port(PCAP) to configure the programmable logic(PL) through PS by using
+FW interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example:
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
--
2.18.0
