On 19 October 2018 at 10:02, A.s. Dong <aisheng.dong@xxxxxxx> wrote: >> -----Original Message----- >> From: Rob Herring [mailto:robh@xxxxxxxxxx] >> Sent: Friday, October 19, 2018 4:25 AM >> To: A.s. Dong <aisheng.dong@xxxxxxx> > [...] >> On Thu, Oct 18, 2018 at 06:19:39PM +0000, A.s. Dong wrote: >> > i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful >> > graphic and multimedia features. This patch adds the core SoC dtsi >> > file support. >> > >> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> >> > Cc: Mark Rutland <mark.rutland@xxxxxxx> >> > Cc: devicetree@xxxxxxxxxxxxxxx >> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx> >> > Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> >> > Cc: Fabio Estevam <fabio.estevam@xxxxxxx> >> > Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx> >> > --- >> > v2->v3: >> > * add more SoC specific compatible string to IP nodes >> > * move memory node into board dts >> > * change pd reg value into hex >> > * add more explanation about SoC in commit message >> > * add external clocks >> > * remove pmu compatible string which is not supported >> > v1->v2: >> > * mu binding usage update >> > * no define for node address >> > * do not use '_' for node name >> > * drop 'fsl-' prefix for imx dtsi >> > * no defines for unit address >> > * generic node names >> > * range map for 32bit register >> > * separate board dts >> > --- >> > Documentation/devicetree/bindings/arm/fsl.txt | 4 + >> > arch/arm64/boot/dts/freescale/imx8-ca35.dtsi | 61 ++ >> > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 870 >> ++++++++++++++++++++++++++ >> > 3 files changed, 935 insertions(+) >> > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ca35.dtsi >> > create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp.dtsi >> > >> > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt >> > b/Documentation/devicetree/bindings/arm/fsl.txt >> > index 968f238..baeb1fc 100644 >> > --- a/Documentation/devicetree/bindings/arm/fsl.txt >> > +++ b/Documentation/devicetree/bindings/arm/fsl.txt >> > @@ -119,6 +119,10 @@ i.MX6q generic board Required root node >> > properties: >> > - compatible = "fsl,imx6q"; >> > >> > +i.MX8QXP generic board >> > +Required root node properties: >> > + - compatible = "fsl,imx8qxp"; >> > + >> > Freescale Vybrid Platform Device Tree Bindings >> > ---------------------------------------------- >> > >> > diff --git a/arch/arm64/boot/dts/freescale/imx8-ca35.dtsi >> > b/arch/arm64/boot/dts/freescale/imx8-ca35.dtsi >> > new file mode 100644 >> > index 0000000..c79e97a >> > --- /dev/null >> > +++ b/arch/arm64/boot/dts/freescale/imx8-ca35.dtsi >> > @@ -0,0 +1,61 @@ >> > +// SPDX-License-Identifier: GPL-2.0+ >> > +/* >> > + * Copyright (C) 2016 Freescale Semiconductor, Inc. >> > + * Copyright 2017~2018 NXP >> > + */ >> > + >> > +#include <dt-bindings/interrupt-controller/arm-gic.h> >> > + >> > +/{ >> > + cpus { >> > + #address-cells = <2>; >> > + #size-cells = <0>; >> > + >> > + /* We have 1 clusters with 4 Cortex-A35 cores */ >> > + A35_0: cpu@0 { >> > + device_type = "cpu"; >> > + compatible = "arm,cortex-a35"; >> > + reg = <0x0 0x0>; >> > + enable-method = "psci"; >> > + next-level-cache = <&A35_L2>; >> > + }; >> > + >> > + A35_1: cpu@1 { >> > + device_type = "cpu"; >> > + compatible = "arm,cortex-a35"; >> > + reg = <0x0 0x1>; >> > + enable-method = "psci"; >> > + next-level-cache = <&A35_L2>; >> > + }; >> > + >> > + A35_2: cpu@2 { >> > + device_type = "cpu"; >> > + compatible = "arm,cortex-a35"; >> > + reg = <0x0 0x2>; >> > + enable-method = "psci"; >> > + next-level-cache = <&A35_L2>; >> > + }; >> > + >> > + A35_3: cpu@3 { >> > + device_type = "cpu"; >> > + compatible = "arm,cortex-a35"; >> > + reg = <0x0 0x3>; >> > + enable-method = "psci"; >> > + next-level-cache = <&A35_L2>; >> > + }; >> > + >> > + A35_L2: l2-cache0 { >> > + compatible = "cache"; >> > + }; >> > + }; >> > + >> > + pmu { >> > + compatible = "arm,armv8-pmuv3"; >> > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; >> > + }; >> > + >> > + psci { >> > + compatible = "arm,psci-1.0"; >> > + method = "smc"; >> > + }; >> > +}; >> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi >> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi >> > new file mode 100644 >> > index 0000000..acb4770 >> > --- /dev/null >> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi >> > @@ -0,0 +1,870 @@ >> > +// SPDX-License-Identifier: GPL-2.0+ >> > +/* >> > + * Copyright (C) 2016 Freescale Semiconductor, Inc. >> > + * Copyright 2017-2018 NXP >> > + * Dong Aisheng <aisheng.dong@xxxxxxx> >> > + */ >> > + >> > +#include <dt-bindings/clock/imx8qxp-clock.h> >> > +#include <dt-bindings/gpio/gpio.h> >> > +#include <dt-bindings/pinctrl/pads-imx8qxp.h> >> > + >> > +#include "imx8-ca35.dtsi" >> > + >> > +/ { >> > + interrupt-parent = <&gic>; >> > + #address-cells = <2>; >> > + #size-cells = <2>; >> > + >> > + aliases { >> > + serial0 = &dma_lpuart0; >> > + mmc0 = &usdhc1; >> > + mmc1 = &usdhc2; >> > + mmc2 = &usdhc3; >> > + }; >> > + >> > + gic: interrupt-controller@51a00000 { >> > + compatible = "arm,gic-v3"; >> > + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ >> > + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) >> */ >> > + #interrupt-cells = <3>; >> > + interrupt-controller; >> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> > + }; >> > + >> > + timer { >> > + compatible = "arm,armv8-timer"; >> > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure >> */ >> > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical >> Non-Secure */ >> > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ >> > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ >> > + }; >> > + >> > + xtal32k: clock-xtal32k { >> > + compatible = "fixed-clock"; >> > + #clock-cells = <0>; >> > + clock-frequency = <32768>; >> > + clock-output-names = "xtal_32KHz"; >> > + }; >> > + >> > + xtal24m: clock-xtal24m { >> > + compatible = "fixed-clock"; >> > + #clock-cells = <0>; >> > + clock-frequency = <24000000>; >> > + clock-output-names = "xtal_24MHz"; >> > + }; >> > + >> > + scu { >> > + compatible = "fsl,imx-scu"; >> > + mbox-names = "tx0", "tx1", "tx2", "tx3", >> > + "rx0", "rx1", "rx2", "rx3"; >> > + mboxes = <&lsio_mu1 0 0 >> > + &lsio_mu1 0 1 >> > + &lsio_mu1 0 2 >> > + &lsio_mu1 0 3 >> > + &lsio_mu1 1 0 >> > + &lsio_mu1 1 1 >> > + &lsio_mu1 1 2 >> > + &lsio_mu1 1 3>; >> > + >> > + clk: clock-controller { >> > + compatible = "fsl,imx8qxp-clk"; >> > + #clock-cells = <1>; >> > + clocks = <&xtal32k &xtal24m>; >> > + clock-names = "xtal_32KHz", "xtal_24Mhz"; >> > + }; >> > + >> > + iomuxc: pinctrl { >> > + compatible = "fsl,imx8qxp-iomuxc"; >> > + }; >> > + >> > + imx8qx-pm { >> > + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + pd_lsio: lsio-power-domain { >> > + #power-domain-cells = <0>; >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + pd_lsio_pwm0: lsio-pwm0@bf { >> > + reg = <0xbf>; >> > + #power-domain-cells = <0>; >> > + power-domains = <&pd_lsio>; >> >> Power domains are supposed to be a block that can be power gated. No chip >> design is going to put tiny PWM, GPIO, etc. blocks each in their own domain. >> >> If you really want to maintain these sub domains, just use 2 >> #power-domain-cells. The first cell can be the power domain and the 2nd cell >> the device ID. >> > > Unfortunately the SCU firmware is designed like that each device has a power domain > ID which is specified in reg property in device tree. > Each driver should enable that power domain before being able to access the HW, > otherwise, xRDC (security and access control HW) may report bus errors. This is what Rob is suggesting: pd_lsio: lsio-power-domain { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <2>; } pd_lsio_pwm0: lsio-pwm0@bf { power-domains = <&pd_lsio 0 0xbf>; } Perhaps it's even sufficient for you to use one cell, if your power-domain provider models only one PM domain. In such case, the below works as well: pd_lsio: lsio-power-domain { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; } pd_lsio_pwm0: lsio-pwm0@bf { power-domains = <&pd_lsio 0xbf>; } In other words, you don't need "reg". To make this work, you also need to implement your own genpd xlate provider function. Do notice that, of_genpd_add_provider_onecell() already supports provider specific xlate functions. Just set it, before calling of_genpd_add_provider_onecell(). If you would like to look at an example, see drivers/soc/tegra/powergate-bpmp.c. > And there could be different multi-level domains, how to do 2cells presentation for this case? > E.g. > Domain_A: { > Domain_B { > Domain_C { > ... > } > } > } To specify a master domain, we use the power-domains specifier from within a power domain provider node. Of course it needs to use the correct number of cells as specified by the master provider, which may be something different that what it self uses. Something like this: pd_lsio_master: lsio-power-domain-master { compatible = "fsl,imx8qxp-scu-pd-master", "fsl,scu-pd0-master"; #power-domain-cells = <0>; } pd_lsio: lsio-power-domain { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; power-domains = <&pd_lsio_master>; } pd_lsio_pwm0: lsio-pwm0@bf { power-domains = <&pd_lsio 0xbf>; } [...] Hope this helps! Kind regards Uffe
