Add imx7ulp pm related components bindings
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx>
---
ChangeLog:
v1->v2:
* new patch
---
.../bindings/arm/freescale/fsl,imx7ulp-pm.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
new file mode 100644
index 0000000..75195be
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
@@ -0,0 +1,23 @@
+Freescale i.MX7ULP Power Management Components
+----------------------------------------------
+
+The Multi-System Mode Controller (MSMC) is responsible for sequencing
+the MCU into and out of all stop and run power modes. Specifically, it
+monitors events to trigger transitions between power modes while
+controlling the power, clocks, and memories of the MCU to achieve the
+power consumption and functionality of that mode.
+
+The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
+Standby modes for either Cortex family. Run, Wait, and Stop are the
+common terms used for the primary operating modes of Kinetis
+microcontrollers.
+
+Required properties:
+- compatible: Should be "fsl,imx7ulp-smc1".
+- reg: Specifies base physical address and size of the register sets.
+
+Example:
+smc1: smc1@40410000 {
+ compatible = "fsl,imx7ulp-smc1";
+ reg = <0x40410000 0x1000>;
+};
--
2.7.4
