> > > The rk809 and rk817 are a Power Management IC (PMIC) for multimedia > > > and handheld devices. It contains the following components: > > > > > > - Regulators > > > - RTC > > > - Clocking > > > > > > Both RK809 and RK817 chips are using a similar register map, > > > so we can reuse the RTC and Clocking and regulators functionality. > > > > > > Signed-off-by: Tony Xie <tony.xie@xxxxxxxxxxxxxx> > > > --- > > > drivers/mfd/Kconfig | 6 +- > > > drivers/mfd/rk808.c | 218 +++++++++++++++++++++++++++++++++++++++++++++- > > > include/linux/mfd/rk808.h | 172 ++++++++++++++++++++++++++++++++++++ > > > kernel/reboot.c | 1 + > > > 4 files changed, 391 insertions(+), 6 deletions(-) [...] > > > diff --git a/kernel/reboot.c b/kernel/reboot.c > > > index e4ced88..83810d7 100644 > > > --- a/kernel/reboot.c > > > +++ b/kernel/reboot.c > > > @@ -49,6 +49,7 @@ > > > */ > > > void (*pm_power_off_prepare)(void); > > > +EXPORT_SYMBOL_GPL(pm_power_off_prepare); > > Why do you need this where no other driver in the kernel does? > There is a gpio_slp pin for RK809 and RK817，this pin has reset、power > down and sleep functions，so > when system is going to power down, this pin is needed to switch to > power down function，and then we just only control > this pin to high to power down the system in atf at last。 There are other PM call-backs that you can use for this. There shouldn't be any requirement to export and call functions at this level directly. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
