Add documentation to describe Xilinx ZynqMP fpga driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
---
Changes for v1:
Created a Seperate(New) DT binding file as
suggested by Rob.
Changes for RFC-V2:
-Moved pcap node as a child to firwmare
node as suggested by Rob.
.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..248ff0ee60a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,17 @@
+--------------------------------------------------------------------------
+Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
+using ZynqMP SoC firmware interface
+--------------------------------------------------------------------------
+For Bitstream configuration on ZynqMp Soc uses processor configuration
+port(PCAP) to configure the programmable logic(PL) through PS by using
+FW interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+-------
+Example
+-------
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
--
2.18.0
