adm127x are hot-swap controllers that allow a circuit board to be removed from
or inserted into a live backplane. This patch adds the device tree
bindings documentation.
Signed-off-by: Kun Yi <kunyi@xxxxxxxxxx>
---
.../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
new file mode 100644
index 000000000000..1ecd03f3da4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt
@@ -0,0 +1,25 @@
+adm1275 properties
+
+Required properties:
+- compatible: Must be one of the supported compatible strings:
+ - "adi,adm1075" for adm1075
+ - "adi,adm1272" for adm1272
+ - "adi,adm1275" for adm1275
+ - "adi,adm1276" for adm1276
+ - "adi,adm1278" for adm1278
+ - "adi,adm1293" for adm1293
+ - "adi,adm1294" for adm1294
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor-micro-ohms
+ Shunt resistor value in micro-Ohm
+
+Example:
+
+adm1272@10 {
+ compatible = "adi,adm1272";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <500>;
+};
--
2.19.1.331.ge82ca0e54c-goog
