Re: [PATCH 03/15] dt-bindings: olpc,xo1.75-ec: Add OLPC XO-1.75 EC bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 10, 2018 at 07:22:48PM +0200, Lubomir Rintel wrote:
> The OLPC XO-1.75 Embedded Controller is a SPI master that uses extra
> signals for handshaking. It needs to know when is the slave (Linux)
> side's TX FIFO ready for transfer (the ready-gpio signal on the SPI
> controller node) and when does it wish to respond with a command (the
> cmd-gpio property).
> 
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> ---
>  .../bindings/misc/olpc,xo1.75-ec.txt          | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
> 
> diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
> new file mode 100644
> index 000000000000..14385fee65d2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
> @@ -0,0 +1,24 @@
> +OLPC XO-1.75 Embedded Controller
> +
> +Required properties:
> +- compatible: Should be "olpc,xo1.75-ec".
> +- cmd-gpio: gpio specifier of the CMD pin

cmd-gpios

> +
> +The embedded controller requires the SPI controller driver to signal readiness
> +to receive a transfer (that is, when TX FIFO contains the response data) by
> +strobing the ACK pin with the ready signal. See the "ready-gpio" property of the

This will need updating based on the SPI binding.

> +SSP binding as documented in:
> +<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
> +
> +Example:
> +	&ssp3 {
> +		spi-slave;
> +		status = "okay";

Don't show status in examples.

> +		ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;
> +
> +		slave {
> +			compatible = "olpc,xo1.75-ec";
> +			spi-cpha;
> +			cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> -- 
> 2.19.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux