Signed-off-by: sudheer.v <open.sudheer@xxxxxxxxx>
---
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 20 ++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 85 ++++++++++++++++++++++++++++++++
2 files changed, 105 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 5dbb33c..f98d55b 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -64,6 +64,26 @@
status = "okay";
};
+&ast_uart_sdma{
+ status = "okay";
+};
+
+&dma_uart0 {
+ status = "disabled";
+};
+
+&dma_uart1 {
+ status = "disabled";
+};
+
+&dma_uart2 {
+ status = "okay";
+};
+
+&dma_uart3 {
+ status = "okay";
+};
+
&mac0 {
status = "okay";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d92f047..ba8edd1 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -436,6 +436,91 @@
status = "disabled";
};
+ ast_uart_sdma: uart_sdma@1e79e000 {
+ compatible = "aspeed,ast-uart-sdma";
+ reg = <0x1e79e000 0x400>;
+ interrupts = <50>;
+ #dma-cells = <1>;
+ dma-channels = <8>;
+ status = "disabled";
+ };
+
+ dma_uart0: dma_uart0@1e783000{
+ compatible = "aspeed,ast-sdma-uart";
+ reg = <0x1e783000 0x1000>;
+ interrupts = <9>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+ reg-shift = <2>;
+ dma-channel = <0>;
+ no-loopback-test;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default &pinctrl_ndsr1_default
+ &pinctrl_ndtr1_default &pinctrl_nri1_default
+ &pinctrl_nrts1_default>;
+ dma-names = "rx", "tx";
+ dmas = <&ast_uart_sdma 1>, <&ast_uart_sdma 0>;
+ status = "disabled";
+ };
+
+ dma_uart1: dma_uart1@1e78d000{
+ compatible = "aspeed,ast-sdma-uart";
+ reg = <0x1e78d000 0x1000>;
+ interrupts = <32>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+ reg-shift = <2>;
+ dma-channel = <1>;
+ no-loopback-test;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default &pinctrl_ncts2_default
+ &pinctrl_ndcd2_default &pinctrl_ndsr2_default
+ &pinctrl_ndtr2_default &pinctrl_nri2_default
+ &pinctrl_nrts2_default>;
+ dma-names = "rx", "tx";
+ dmas = <&ast_uart_sdma 3>, <&ast_uart_sdma 2>;
+ status = "disabled";
+};
+
+ dma_uart2: dma_uart2@1e78e000{
+ compatible = "aspeed,ast-sdma-uart";
+ reg = <0x1e78e000 0x1000>;
+ interrupts = <33>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+ reg-shift = <2>;
+ dma-channel = <2>;
+ no-loopback-test;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default
+ &pinctrl_rxd3_default &pinctrl_ncts3_default
+ &pinctrl_ndcd3_default &pinctrl_ndsr3_default
+ &pinctrl_ndtr3_default &pinctrl_nri3_default
+ &pinctrl_nrts3_default>;
+ dma-names = "rx", "tx";
+ dmas = <&ast_uart_sdma 5>, <&ast_uart_sdma 4>;
+ status = "disabled";
+};
+
+ dma_uart3: dma_uart3@1e78f000{
+ compatible = "aspeed,ast-sdma-uart";
+ reg = <0x1e78f000 0x1000>;
+ interrupts = <34>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+ reg-shift = <2>;
+ dma-channel = <3>;
+ no-loopback-test;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default &pinctrl_ncts4_default
+ &pinctrl_ndcd4_default &pinctrl_ndsr4_default
+ &pinctrl_ndtr4_default &pinctrl_nri4_default
+ &pinctrl_nrts4_default>;
+ dma-names = "rx", "tx";
+ dmas = <&ast_uart_sdma 7>, <&ast_uart_sdma 6>;
+ status = "disabled";
+};
+
i2c: i2c@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.9.1
