Re: [PATCH 2/7] Input: sx8654 - add reset-gpio support

[Richard Leitner <richard.leitner@xxxxxxxxxxx>]

Hi Dimitry,
thanks for the quick reply!

On 10/16/18 7:39 PM, Dmitry Torokhov wrote:
> Hi Richard,
>
> On Tue, Oct 16, 2018 at 11:16:48AM +0200, Richard Leitner wrote:
> > The sx8654 features a NRST input which may be connected to a GPIO.
> > Therefore add support for hard-resetting the sx8654 via this NRST.
> >
> > If the reset-gpio property is provided the sx8654 is resetted via NRST
> > instead of the soft-reset via I2C.

...

> > +
> > +	dev_dbg(&ts->client->dev, "NRST unavailable, try softreset\n");
> > +	err = i2c_smbus_write_byte_data(ts->client, I2C_REG_SOFTRESET,
> > +					SOFTRESET_VALUE);
> > +	if (err)
> > +		return err;
>
> Have this in an "else" branch?

If that's the preferred way... of course.

> > +
> > +	return 0;
> > +}
> > +
> >   static int sx8654_open(struct input_dev *dev)
> >   {
> >   	struct sx8654 *sx8654 = input_get_drvdata(dev);
> > @@ -171,6 +195,44 @@ static void sx8654_close(struct input_dev *dev)
> >   	}
> >   }
> >   
> > +#ifdef CONFIG_OF
> > +static int sx8654_get_ofdata(struct sx8654 *ts)
> > +{
> > +	struct device *dev = &ts->client->dev;
> > +	struct device_node *node = dev->of_node;
> > +	int err;
> > +
> > +	if (!node) {
> > +		ts->gpio_reset = NULL;
> > +		return 0;
> > +	}
>
> There is no need to wrap this into CONFIG_OF or test "node". Just use
> devm_gpiod_get_optional() and it will work equally well on DT, ACPI, and
> static board systems.

Ok. Thank you for that information!
I haven't been aware of this before :-)

> > +
> > +	ts->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> > +	if (PTR_ERR(ts->gpio_reset) == -EPROBE_DEFER) {
> > +		return -EPROBE_DEFER;
> > +	} else if (IS_ERR(ts->gpio_reset)) {
> > +		err = PTR_ERR(ts->gpio_reset);
>
> I'd do:
>
> 		if (err != -EPROBE_DEFER)
> 			dev_err(...)
>
> here instead of separate branch.

Indeed... Looks like a more sexy solution. Thanks.

> > +		dev_err(dev, "unable to request GPIO reset pin (%d)\n", err);
> > +		return err;
> > +	}
> > +	dev_dbg(dev, "got GPIO reset pin\n");
>
> Also, I'd move all this code directly into probe() since all this
> #ifdefery is not needed.

Without the #ifdef'ery and node checking this sounds reasonable.

> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id sx8654_of_match[] = {
> > +	{ .compatible = "semtech,sx8654", },
> > +	{ },
> > +};
>
> Please keep the device table wehere it was.

OK.

> > @@ -186,10 +248,20 @@ static int sx8654_probe(struct i2c_client *client,
> >   	if (!sx8654)
> >   		return -ENOMEM;
> >   
> > +	sx8654->client = client;
> > +
> > +	error = sx8654_get_ofdata(sx8654);
> > +	if (error) {
> > +		dev_err(&client->dev, "get_ofdata failed: %d\n", error);
> > +		return error;
> > +	}
> > +
> >   	input = devm_input_allocate_device(&client->dev);
> >   	if (!input)
> >   		return -ENOMEM;
> >   
> > +	sx8654->input = input;
> > +
> >   	input->name = "SX8654 I2C Touchscreen";
> >   	input->id.bustype = BUS_I2C;
> >   	input->dev.parent = &client->dev;
> > @@ -201,15 +273,11 @@ static int sx8654_probe(struct i2c_client *client,
> >   	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
> >   	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
> >   
> > -	sx8654->client = client;
> > -	sx8654->input = input;
> > -
>
> Why do we need to move this?

This was because sx8654_get_ofdata needed ts->client->dev.
But as I will integrate the reset gpio getting in the probe function 
I'll move it back.

...

> Thanks.

I'll send a v2 of the series as soon as I have fixed the other patches.

regards;Richard.L