commit 025dd3daeda77f61a280da87ae701 ("PCI: keystone: Add error IRQ handler") added dev_err() message only for ERR_AXI and ERR_FATAL. Add debug error message for ERR_SYS, ERR_NONFATAL, ERR_CORR and ERR_AER here. While at that avoid using ERR_IRQ_STATUS_RAW and use ERR_IRQ_STATUS instead. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- drivers/pci/controller/dwc/pci-keystone.c | 33 +++++++++++++++-------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index 67646a64c895..35ad3686d4a1 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -78,8 +78,6 @@ #define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */ #define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \ ERR_NONFATAL | ERR_FATAL | ERR_SYS) -#define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI) -#define ERR_IRQ_STATUS_RAW 0x1c0 #define ERR_IRQ_STATUS 0x1c4 #define ERR_IRQ_ENABLE_SET 0x1c8 #define ERR_IRQ_ENABLE_CLR 0x1cc @@ -251,18 +249,31 @@ static void ks_pcie_enable_error_irq(struct keystone_pcie *ks_pcie) static irqreturn_t ks_pcie_handle_error_irq(struct keystone_pcie *ks_pcie) { - u32 status; + u32 reg; + struct device *dev = ks_pcie->pci->dev; + + reg = ks_pcie_app_readl(ks_pcie, ERR_IRQ_STATUS); + + if (reg & ERR_SYS) + dev_err(dev, "System Error\n"); + + if (reg & ERR_FATAL) + dev_err(dev, "Fatal Error\n"); + + if (reg & ERR_NONFATAL) + dev_dbg(dev, "Non Fatal Error\n"); + + if (reg & ERR_CORR) + dev_dbg(dev, "Correctable Error\n"); + + if (reg & ERR_AXI) + dev_err(dev, "AXI tag lookup fatal Error\n"); - status = ks_pcie_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL; - if (!status) - return IRQ_NONE; + if (reg & ERR_AER) + dev_err(dev, "ECRC Error\n"); - if (status & ERR_FATAL_IRQ) - dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n", - status); + ks_pcie_app_writel(ks_pcie, ERR_IRQ_STATUS, reg); - /* Ack the IRQ; status bits are RW1C */ - ks_pcie_app_writel(ks_pcie, ERR_IRQ_STATUS, status); return IRQ_HANDLED; } -- 2.17.1