[PATCH v2 2/7] mtd: spi-nor: add opcodes for octal Read/Write commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



- Add opcodes for octal I/O commands
  * Read  : 1-1-8 and 1-8-8 protocol
  * Write : 1-1-8 and 1-8-8 protocol
  * opcodes for 4-byte address mode command

- Entry of macros in _convert_3to4_xxx function

- Add flag specifying flash support octal read commands.

Signed-off-by: Vignesh R <vigneshr@xxxxxx>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
---
Changes for v2:
 Incorporated review comments of Boris and Vignesh

 drivers/mtd/spi-nor/spi-nor.c | 12 ++++++++++++
 include/linux/mtd/spi-nor.h   |  8 ++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 0b8a6e0..7c64ff0 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -90,6 +90,7 @@ struct flash_info {
 #define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
 #define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
 #define USE_CLSR		BIT(14)	/* use CLSR command */
+#define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
 
 	int	(*quad_enable)(struct spi_nor *nor);
 };
@@ -209,6 +210,8 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode)
 		{ SPINOR_OP_READ_1_2_2,	SPINOR_OP_READ_1_2_2_4B },
 		{ SPINOR_OP_READ_1_1_4,	SPINOR_OP_READ_1_1_4_4B },
 		{ SPINOR_OP_READ_1_4_4,	SPINOR_OP_READ_1_4_4_4B },
+		{ SPINOR_OP_READ_1_1_8,	SPINOR_OP_READ_1_1_8_4B },
+		{ SPINOR_OP_READ_1_8_8,	SPINOR_OP_READ_1_8_8_4B },
 
 		{ SPINOR_OP_READ_1_1_1_DTR,	SPINOR_OP_READ_1_1_1_DTR_4B },
 		{ SPINOR_OP_READ_1_2_2_DTR,	SPINOR_OP_READ_1_2_2_DTR_4B },
@@ -225,6 +228,8 @@ static inline u8 spi_nor_convert_3to4_program(u8 opcode)
 		{ SPINOR_OP_PP,		SPINOR_OP_PP_4B },
 		{ SPINOR_OP_PP_1_1_4,	SPINOR_OP_PP_1_1_4_4B },
 		{ SPINOR_OP_PP_1_4_4,	SPINOR_OP_PP_1_4_4_4B },
+		{ SPINOR_OP_PP_1_1_8,	SPINOR_OP_PP_1_1_8_4B },
+		{ SPINOR_OP_PP_1_8_8,	SPINOR_OP_PP_1_8_8_4B },
 	};
 
 	return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
@@ -3195,6 +3200,13 @@ static int spi_nor_init_params(struct spi_nor *nor,
 					  SNOR_PROTO_1_1_4);
 	}
 
+	if (info->flags & SPI_NOR_OCTAL_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
+					  0, 8, SPINOR_OP_READ_1_1_8,
+					  SNOR_PROTO_1_1_8);
+	}
+
 	/* Page Program settings. */
 	params->hwcaps.mask |= SNOR_HWCAPS_PP;
 	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 8b1acf6..019f534 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -50,9 +50,13 @@
 #define SPINOR_OP_READ_1_2_2	0xbb	/* Read data bytes (Dual I/O SPI) */
 #define SPINOR_OP_READ_1_1_4	0x6b	/* Read data bytes (Quad Output SPI) */
 #define SPINOR_OP_READ_1_4_4	0xeb	/* Read data bytes (Quad I/O SPI) */
+#define SPINOR_OP_READ_1_1_8	0x8b	/* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8	0xcb	/* Read data bytes (Octal I/O SPI) */
 #define SPINOR_OP_PP		0x02	/* Page program (up to 256 bytes) */
 #define SPINOR_OP_PP_1_1_4	0x32	/* Quad page program */
 #define SPINOR_OP_PP_1_4_4	0x38	/* Quad page program */
+#define SPINOR_OP_PP_1_1_8	0x82	/* Octal page program */
+#define SPINOR_OP_PP_1_8_8	0xc2	/* Octal page program */
 #define SPINOR_OP_BE_4K		0x20	/* Erase 4KiB block */
 #define SPINOR_OP_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */
 #define SPINOR_OP_BE_32K	0x52	/* Erase 32KiB block */
@@ -73,9 +77,13 @@
 #define SPINOR_OP_READ_1_2_2_4B	0xbc	/* Read data bytes (Dual I/O SPI) */
 #define SPINOR_OP_READ_1_1_4_4B	0x6c	/* Read data bytes (Quad Output SPI) */
 #define SPINOR_OP_READ_1_4_4_4B	0xec	/* Read data bytes (Quad I/O SPI) */
+#define SPINOR_OP_READ_1_1_8_4B	0x7c	/* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8_4B	0xcc	/* Read data bytes (Octal I/O SPI) */
 #define SPINOR_OP_PP_4B		0x12	/* Page program (up to 256 bytes) */
 #define SPINOR_OP_PP_1_1_4_4B	0x34	/* Quad page program */
 #define SPINOR_OP_PP_1_4_4_4B	0x3e	/* Quad page program */
+#define SPINOR_OP_PP_1_1_8_4B	0x84	/* Octal page program */
+#define SPINOR_OP_PP_1_8_8_4B	0x8e	/* Octal page program */
 #define SPINOR_OP_BE_4K_4B	0x21	/* Erase 4KiB block */
 #define SPINOR_OP_BE_32K_4B	0x5c	/* Erase 32KiB block */
 #define SPINOR_OP_SE_4B		0xdc	/* Sector erase (usually 64KiB) */
-- 
2.7.4





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux