On Sun, Oct 14, 2018 at 02:34:56PM +0000, A.s. Dong wrote:
> Add imx8qxp mek board support.
>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
> Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx>
> ---
> Documentation/devicetree/bindings/arm/fsl.txt | 4 +
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 134 ++++++++++++++++++++++++++
> 3 files changed, 139 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
>
> +&iomuxc {
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020
> + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
> + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020
> + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020
> + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020
> + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020
> + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020
> + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020
> + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020
> + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020
> + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020
> + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020
> + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020
> + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
I doubt these names will be valid for future SoCs. They should have a
IMX8QP_ prefix.
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
