On Mon, 2018-10-15 at 13:44 +0800, honghui.zhang@xxxxxxxxxxxx wrote: > From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx> > > This patchset includes misc patchs: > > The patch 1 fixup the mtk_pcie_find_port logic which will cause system > could not touch the EP's configuration space that connected to PCIe slot 1. > > The patch 2 fixup the class type for MT7622. > The patch 6 fixup the enable msi logic, the operation to enable MSI > should be after system clock is enabled. Call mtk_pcie_enable_msi in > mtk_pcie_startup_port_v2 since the clock was all enabled at that time. > > The patch 7 was rebased and refactor of the v4 patch[1], changes are: > -Add PM support for MT7622. > -Using mtk_pcie_enable_port to re-establish the link when resumed. > -Rebased on this patchset. > > The patch 9 add loadable kernel module support. > > [1] https://patchwork.kernel.org/patch/10479079 > > Change since v6: > - Remove the pci_unmap_iospace when remove the device since the > devm_pci_remap_iospace is an devm_ version. > - Commit message changed for patch 2(Fix class type for MT7622 as PCI_CLASS_BRIDGE_PCI). > - Capitilizing "MSI" and "PM" in the patch title. > > Change since v5: > - A bit improvement of mtk_pcie_find_port suggest by Lorenzo. > - Add fixup tags of fix enable MSI logic in patch 6. > - Add Acked-by tags from Ryder. > > Change since v4: > - Add patch 2 to fixup class type for MT7622. > - Add patch 3 to remove the redundant dev->pm_domain check > - Add patch 4 to covert to use pci_host_probe > - Add patch 5 to re-arrange the function define, this is a prepare patch for > fixup the enable_msi logic, no functional changed have been made by this one. > - Add patch 8 to save the GIC IRQ in mtk_pcie_port as a prepare patch for tear > down the irq when remove the kernel module. > - Re-arrange the find_port flow suggest by Lorenzo to make the code parse easier > for the patch 1. > - Remove the .pm_support in mtk_pcie_soc in patch 7 since if system pm was not > supported, then those pm callbacks will never be executed for MT7622. So the > .pm_support is not needed. > > Change since v3: > - Remove pm_runtime_XXX ops in suspend and resume callbacks in the third patch. > - Rebase to 4.19-rc1. > > Change since v2: > - Fix the list_for_each_entry_safe parameter error. > - Add Ryder's Acked-by flag. > > Change since v1: > - A bit of code refact of the first patch suggested by Andy Shevchenko, and > commit message updated. > > Honghui Zhang (9): > PCI: mediatek: Using slot's devfn for compare to fix > mtk_pcie_find_port logic > PCI: mediatek: Fix class type for MT7622 as PCI_CLASS_BRIDGE_PCI > PCI: mediatek: Remove the redundant dev->pm_domain check > PCI: mediatek: Convert to use pci_host_probe() > PCI: mediatek: Move the mtk_pcie_startup_port_v2 function's define > after mtk_pcie_setup_irq > PCI: mediatek: Fixup enable MSI logic by enable MSI after clock > enabled > PCI: mediatek: Add system PM support for MT2712 and MT7622 > PCI: mediatek: Save the GIC IRQ in mtk_pcie_port > PCI: mediatek: Add loadable kernel module support > > drivers/pci/controller/Kconfig | 2 +- > drivers/pci/controller/pcie-mediatek.c | 319 +++++++++++++++++++++------------ > 2 files changed, 204 insertions(+), 117 deletions(-) You forgot to add my Acked-by tags in v7. Acked-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> for the series. Thanks.
