Changes for v5: - Updated temperature sensor regulator name in board device tree - Sorted nodes alphabatically and unit-address in SoC/board device tree - Identation, new line update in SoC/board device tree - Updated nodes name as per DT spec generic name recommendation in SoC DT - Updated macro define for interrupt/gpio property - Updated i2c node property name scl-gpio - Removed device_type property except cpu/memory node - Added esdhc controller nodes in SoC/RDB board device tree - Added aliases for uart/crypto nodes - Add SoC die attribute definition for LX2160A Changes for v4: - Updated bindings for lx2160a clockgen and dcfg - Modified commit message for lx2160a clockgen changes - Updated interrupt property with macro definition - Added required enable-method property to each core node with psci value - Removed unused node syscon in device tree - Removed blank lines in device tree fsl-lx2160a.dtsi - Updated uart node compatible sbsa-uart first - Added and defined vcc-supply property to temperature sensor node in device tree fsl-lx2160a-rdb.dts Changes for v3: -Split clockgen support patch into below two patches: - a)Updated array size of cmux_to_group[] with NUM_CMUX+1 to include -1 terminator and p4080 cmux_to_group[] array with -1 terminator - b)Add clockgen support for lx2160a Changes for v2: - Modified cmux_to_group array to include -1 terminator - Revert NUM_CMUX to original value 8 from 16 - Remove “As LX2160A is 16 core, so modified value for NUM_CMUX” in patch "[PATCH 3/5] drivers: clk-qoriq: Add clockgen support for lx2160a" description - Populated cache properties for L1 and L2 cache in lx2160a device-tree. - Removed reboot node from lx2160a device-tree as PSCI is implemented. - Removed incorrect comment for timer node interrupt property in lx2160a device-tree. - Modified pmu node compatible property from "arm,armv8-pmuv3" to "arm,cortex-a72-pmu" in lx2160a device-tree - Non-standard aliases removed in lx2160a rdb board device-tree - Updated i2c child nodes to generic name in lx2160a rdb device-tree. Changes for v1: - Add compatible string for LX2160A clockgen support - Add compatible string to initialize LX2160A guts driver - Add compatible string for LX2160A support in dt-bindings - Add dts file to enable support for LX2160A SoC and LX2160A RDB (Reference design board) Vabhav Sharma (4): dt-bindings: arm64: add compatible for LX2160A soc/fsl/guts: Add definition for LX2160A arm64: dts: add QorIQ LX2160A SoC support arm64: dts: add LX2160ARDB board support Yogesh Gaur (2): clk: qoriq: increase array size of cmux_to_group clk: qoriq: Add clockgen support for lx2160a Documentation/devicetree/bindings/arm/fsl.txt | 14 +- .../devicetree/bindings/clock/qoriq-clock.txt | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 119 ++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 765 +++++++++++++++++++++ drivers/clk/clk-qoriq.c | 16 +- drivers/cpufreq/qoriq-cpufreq.c | 1 + drivers/soc/fsl/guts.c | 6 + 8 files changed, 920 insertions(+), 3 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi -- 2.7.4
