AXP803 is compatible with AXP813. Add DT nodes ADC, GPIO,
AC and battery power supplies.
Signed-off-by: Oskari Lemmela <oskari@xxxxxxxxxxx>
Reviewed-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
---
arch/arm64/boot/dts/allwinner/axp803.dtsi | 31 +++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index e5eae8bafc42..128177178615 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -49,6 +49,37 @@
interrupt-controller;
#interrupt-cells = <1>;
+ ac_power_supply: ac-power-supply {
+ compatible = "x-powers,axp813-ac-power-supply";
+ status = "disabled";
+ };
+
+ axp_adc: adc {
+ compatible = "x-powers,axp813-adc";
+ #io-channel-cells = <1>;
+ };
+
+ axp_gpio: gpio {
+ compatible = "x-powers,axp813-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio0_ldo: gpio0-ldo {
+ pins = "GPIO0";
+ function = "ldo";
+ };
+
+ gpio1_ldo: gpio1-ldo {
+ pins = "GPIO1";
+ function = "ldo";
+ };
+ };
+
+ battery_power_supply: battery-power-supply {
+ compatible = "x-powers,axp813-battery-power-supply";
+ status = "disabled";
+ };
+
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
--
2.17.1
