Re: [PATCH V3 2/3] dt-bindings: mmc: sdhci-msm: Add entries for passing load values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 08, 2018 at 06:48:58PM +0530, Veerabhadrarao Badiganti wrote:
> From: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx>
> 
> The load a particular sdhc controller should request from a regulator
> is device specific and hence each device should individually vote for
> the required load.
> 
> Signed-off-by: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx>
> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> index 502b3b8..cb22178 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> @@ -25,6 +25,10 @@ Required properties:
>  	"xo"	- TCXO clock (optional)
>  	"cal"	- reference clock for RCLK delay calibration (optional)
>  	"sleep"	- sleep clock for RCLK delay calibration (optional)
> +- qcom,<supply>-current-level-microamp - specifies load levels for supply during BUS_ON and
> +					BUS_OFF states in power irq. Should be specified in
> +					pairs (lpm, hpm), for BUS_OFF and BUS_ON respectively.
> +					Units uA.

Seems like something that should be common?



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux