Remove support for the LM3633 LED device
from the ti-lmu. The LM3633 will be supported
via a stand alone LED driver.
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
.../devicetree/bindings/mfd/ti-lmu.txt | 48 -------------------
1 file changed, 48 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index 920f910be4e9..573e88578d3d 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -7,7 +7,6 @@ TI LMU driver supports lighting devices below.
LM3532 Backlight
LM3631 Backlight and regulator
LM3632 Backlight and regulator
- LM3633 Backlight, LED and fault monitor
LM3695 Backlight
Required properties:
@@ -15,12 +14,10 @@ Required properties:
"ti,lm3532"
"ti,lm3631"
"ti,lm3632"
- "ti,lm3633"
"ti,lm3695"
- reg: I2C slave address.
0x11 for LM3632
0x29 for LM3631
- 0x36 for LM3633
0x38 for LM3532
0x63 for LM3695
@@ -157,51 +154,6 @@ lm3632@11 {
};
};
-lm3633@36 {
- compatible = "ti,lm3633";
- reg = <0x36>;
-
- enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
- backlight {
- compatible = "ti,lm3633-backlight";
-
- main {
- label = "main_lcd";
- led-sources = <1 2>;
- ramp-up-msec = <500>;
- ramp-down-msec = <500>;
- };
-
- front {
- label = "front_lcd";
- led-sources = <0>;
- ramp-up-msec = <1000>;
- ramp-down-msec = <0>;
- };
- };
-
- leds {
- compatible = "ti,lm3633-leds";
-
- chan1 {
- label = "status";
- led-sources = <1>;
- led-max-microamp = <6000>;
- };
-
- chan345 {
- label = "rgb";
- led-sources = <3 4 5>;
- led-max-microamp = <10000>;
- };
- };
-
- fault-monitor {
- compatible = "ti,lm3633-fault-monitor";
- };
-};
-
lm3695@63 {
compatible = "ti,lm3695";
reg = <0x63>;
--
2.19.0
