From: Laurentiu Tudor <laurentiu.tudor@xxxxxxx> The pci controllers are also behind the smmu so add the iommu-map property to reflect this. The bootloader needs to patch the stream id ranges to some sane values. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 0e8fc8f29997..ccadc40a36f4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -716,6 +716,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -741,6 +742,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -766,6 +768,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 29b07bdd4207..a12d33362554 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -685,6 +685,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -710,6 +711,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -735,6 +737,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ -- 2.17.1