HI Boris Usually they want the bindings to be sent before the changes. You might want to swap the order of 13 and 14. And I think the version reviewed by Rob is too different to this version, maybe we want to ping him to be 100% sure that his review is still valid. FWIW: To the whose serie, after you send the fixed version, you can add to all the patches my: Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx> and to the last one: Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx> Thanks a lot for the serie! On Mon, Oct 8, 2018 at 10:10 PM Boris Brezillon <boris.brezillon@xxxxxxxxxxx> wrote: > > From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx> > > Add documentation for the addr-gpios. This extension to the physmap > binding allow creating flash devices that are paged using GPIOs. > > Cc: devicetree@xxxxxxxxxxxxxxx > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx> > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mtd/mtd-physmap.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt > index 232fa12e90ef..7df0dcaccb7d 100644 > --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt > +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt > @@ -29,6 +29,8 @@ file systems on embedded devices. > - use-advanced-sector-protection: boolean to enable support for the > advanced sector protection (Spansion: PPB - Persistent Protection > Bits) locking. > + - addr-gpios : (optional) List of GPIO descriptors that will be used to > + address the MSBs address lines. The order goes from LSB to MSB. > > For JEDEC compatible devices, the following additional properties > are defined: > -- > 2.14.1 > -- Ricardo Ribalda
