On Thu, 4 Oct 2018 09:24:57 +0000 Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx> wrote: > Hi Boris, > > > -----Original Message----- > > From: Boris Brezillon [mailto:boris.brezillon@xxxxxxxxxxx] > > Sent: Thursday, October 4, 2018 2:48 PM > > To: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx> > > Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx; marek.vasut@xxxxxxxxx; vigneshr@xxxxxx; > > linux-spi@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; robh@xxxxxxxxxx; > > mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; linux-arm- > > kernel@xxxxxxxxxxxxxxxxxxx; computersforpeace@xxxxxxxxx; > > frieder.schrempf@xxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > > Subject: Re: [PATCH 4/4] arm64: dts: lx2160a: update fspi node > > > > On Thu, 4 Oct 2018 14:18:40 +0530 > > Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx> wrote: > > > > > Flash mt35xu512aba connected to FlexSPI controller supports > > > 1-1-8 protocol. > > > Added flag spi-rx-bus-width and spi-tx-bus-width with values as > > > 8 and 1 respectively for both flashes connected at CS0 and CS1. > > > > > > Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx> > > > --- > > > arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++++ > > > 1 file changed, 4 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > > b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > > index 901ca346..817175a 100644 > > > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > > @@ -42,6 +42,8 @@ > > > m25p,fast-read; > > > spi-max-frequency = <20000000>; > > > reg = <0>; > > > + spi-rx-bus-width = <8>; > > > + spi-tx-bus-width = <1>; > > > > Why 1? The flash is already flagged with SPI_NOR_OCTAL_READ, which means > > only the read path will use 1-1-8 mode, so you can safely set spi-tx-bus-width I meant 'set spi-tx-bus-width to 8' here > > here and let the framework choose the appropriate mode based on the flash > > capabilities. > > Ok. > > > > > > }; > > > > > > mt35xu512aba1: flash@1 { > > > @@ -51,6 +53,8 @@ > > > m25p,fast-read; > > > spi-max-frequency = <20000000>; > > > reg = <1>; > > > + spi-rx-bus-width = <8>; > > > + spi-tx-bus-width = <1>; > > > }; > > > }; > > > >
