Add DMAs to enable PWM input capture using STM32 timers on stm32mp157c.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 58 ++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 661be94..17a748f 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -98,6 +98,12 @@
reg = <0x40000000 0x400>;
clocks = <&rcc TIM2_K>;
clock-names = "int";
+ dmas = <&dmamux1 18 0x400 0x1>,
+ <&dmamux1 19 0x400 0x1>,
+ <&dmamux1 20 0x400 0x1>,
+ <&dmamux1 21 0x400 0x1>,
+ <&dmamux1 22 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up";
status = "disabled";
pwm {
@@ -119,6 +125,13 @@
reg = <0x40001000 0x400>;
clocks = <&rcc TIM3_K>;
clock-names = "int";
+ dmas = <&dmamux1 23 0x400 0x1>,
+ <&dmamux1 24 0x400 0x1>,
+ <&dmamux1 25 0x400 0x1>,
+ <&dmamux1 26 0x400 0x1>,
+ <&dmamux1 27 0x400 0x1>,
+ <&dmamux1 28 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
status = "disabled";
pwm {
@@ -140,6 +153,11 @@
reg = <0x40002000 0x400>;
clocks = <&rcc TIM4_K>;
clock-names = "int";
+ dmas = <&dmamux1 29 0x400 0x1>,
+ <&dmamux1 30 0x400 0x1>,
+ <&dmamux1 31 0x400 0x1>,
+ <&dmamux1 32 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4";
status = "disabled";
pwm {
@@ -161,6 +179,13 @@
reg = <0x40003000 0x400>;
clocks = <&rcc TIM5_K>;
clock-names = "int";
+ dmas = <&dmamux1 55 0x400 0x1>,
+ <&dmamux1 56 0x400 0x1>,
+ <&dmamux1 57 0x400 0x1>,
+ <&dmamux1 58 0x400 0x1>,
+ <&dmamux1 59 0x400 0x1>,
+ <&dmamux1 60 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
status = "disabled";
pwm {
@@ -182,6 +207,8 @@
reg = <0x40004000 0x400>;
clocks = <&rcc TIM6_K>;
clock-names = "int";
+ dmas = <&dmamux1 69 0x400 0x1>;
+ dma-names = "up";
status = "disabled";
timer@5 {
@@ -198,6 +225,8 @@
reg = <0x40005000 0x400>;
clocks = <&rcc TIM7_K>;
clock-names = "int";
+ dmas = <&dmamux1 70 0x400 0x1>;
+ dma-names = "up";
status = "disabled";
timer@6 {
@@ -465,6 +494,15 @@
reg = <0x44000000 0x400>;
clocks = <&rcc TIM1_K>;
clock-names = "int";
+ dmas = <&dmamux1 11 0x400 0x1>,
+ <&dmamux1 12 0x400 0x1>,
+ <&dmamux1 13 0x400 0x1>,
+ <&dmamux1 14 0x400 0x1>,
+ <&dmamux1 15 0x400 0x1>,
+ <&dmamux1 16 0x400 0x1>,
+ <&dmamux1 17 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
status = "disabled";
pwm {
@@ -486,6 +524,15 @@
reg = <0x44001000 0x400>;
clocks = <&rcc TIM8_K>;
clock-names = "int";
+ dmas = <&dmamux1 47 0x400 0x1>,
+ <&dmamux1 48 0x400 0x1>,
+ <&dmamux1 49 0x400 0x1>,
+ <&dmamux1 50 0x400 0x1>,
+ <&dmamux1 51 0x400 0x1>,
+ <&dmamux1 52 0x400 0x1>,
+ <&dmamux1 53 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
status = "disabled";
pwm {
@@ -543,6 +590,11 @@
reg = <0x44006000 0x400>;
clocks = <&rcc TIM15_K>;
clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
status = "disabled";
pwm {
@@ -564,6 +616,9 @@
reg = <0x44007000 0x400>;
clocks = <&rcc TIM16_K>;
clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
status = "disabled";
pwm {
@@ -584,6 +639,9 @@
reg = <0x44008000 0x400>;
clocks = <&rcc TIM17_K>;
clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
status = "disabled";
pwm {
--
1.9.1
