The STiH407 is advanced multi-HD AVC processor with 3D graphics acceleration
and 1.5-GHz ARM Cortex-A9 SMP CPU.
Signed-off-by: Maxime Coquelin <maxime.coquelin@xxxxxx>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
---
arch/arm/boot/dts/stih407-clock.dtsi | 41 +++
arch/arm/boot/dts/stih407-pinctrl.dtsi | 618 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stih407.dtsi | 250 +++++++++++++
3 files changed, 909 insertions(+)
create mode 100644 arch/arm/boot/dts/stih407-clock.dtsi
create mode 100644 arch/arm/boot/dts/stih407-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stih407.dtsi
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
new file mode 100644
index 0000000..f50ac6f
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics R&D Limited
+ * <stlinux-devel@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+ clocks {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ CLK_SYSIN: CLK_SYSIN {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: arm_periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <600000000>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ CLK_EXT2F_A9: clockgenC0@13 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "CLK_S_ICN_REG_0";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
new file mode 100644
index 0000000..2d8543e
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,618 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+ aliases {
+ /* 0-5: PIO_SBC */
+ gpio0 = &PIO0;
+ gpio1 = &PIO1;
+ gpio2 = &PIO2;
+ gpio3 = &PIO3;
+ gpio4 = &PIO4;
+ gpio5 = &PIO5;
+ /* 10-19: PIO_FRONT0 */
+ gpio6 = &PIO10;
+ gpio7 = &PIO11;
+ gpio8 = &PIO12;
+ gpio9 = &PIO13;
+ gpio10 = &PIO14;
+ gpio11 = &PIO15;
+ gpio12 = &PIO16;
+ gpio13 = &PIO17;
+ gpio14 = &PIO18;
+ gpio15 = &PIO19;
+ /* 20: PIO_FRONT1 */
+ gpio16 = &PIO20;
+ /* 30-35: PIO_REAR */
+ gpio17 = &PIO30;
+ gpio18 = &PIO31;
+ gpio19 = &PIO32;
+ gpio20 = &PIO33;
+ gpio21 = &PIO34;
+ gpio22 = &PIO35;
+ /* 40-42: PIO_FLASH */
+ gpio23 = &PIO40;
+ gpio24 = &PIO41;
+ gpio25 = &PIO42;
+ };
+
+ soc {
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-sbc-pinctrl";
+ st,syscfg = <&syscfg_sbc>;
+ reg = <0x0961f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09610000 0x6000>;
+
+ PIO0: gpio@09610000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO0";
+ };
+ PIO1: gpio@09611000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO1";
+ };
+ PIO2: gpio@09612000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO2";
+ };
+ PIO3: gpio@09613000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO3";
+ };
+ PIO4: gpio@09614000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO4";
+ };
+
+ PIO5: gpio@09615000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO5";
+ };
+
+ rc {
+ pinctrl_ir: ir0 {
+ st,pins {
+ ir = <&PIO4 0 ALT2 IN>;
+ };
+ };
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0 {
+ pinctrl_sbc_serial0: sbc_serial0-0 {
+ st,pins {
+ tx = <&PIO3 4 ALT1 OUT>;
+ rx = <&PIO3 5 ALT1 IN>;
+ };
+ };
+ };
+ /* SBC_ASC1 - UART11 */
+ sbc_serial1 {
+ pinctrl_sbc_serial1: sbc_serial1-0 {
+ st,pins {
+ tx = <&PIO2 6 ALT3 OUT>;
+ rx = <&PIO2 7 ALT3 IN>;
+ };
+ };
+ };
+
+ i2c10 {
+ pinctrl_i2c10_default: i2c10-default {
+ st,pins {
+ sda = <&PIO4 6 ALT1 BIDIR>;
+ scl = <&PIO4 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c11 {
+ pinctrl_i2c11_default: i2c11-default {
+ st,pins {
+ sda = <&PIO5 1 ALT1 BIDIR>;
+ scl = <&PIO5 0 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ keyscan {
+ pinctrl_keyscan: keyscan {
+ st,pins {
+ keyin0 = <&PIO4 0 ALT6 IN>;
+ keyin1 = <&PIO4 5 ALT4 IN>;
+ keyin2 = <&PIO0 4 ALT2 IN>;
+ keyin3 = <&PIO2 6 ALT2 IN>;
+
+ keyout0 = <&PIO4 6 ALT4 OUT>;
+ keyout1 = <&PIO1 7 ALT2 OUT>;
+ keyout2 = <&PIO0 6 ALT2 OUT>;
+ keyout3 = <&PIO2 7 ALT2 OUT>;
+ };
+ };
+ };
+
+ gmac1 {
+ /*
+ Almost all the boards based on STiH407 SoC have an embedded
+ switch where the mdio/mdc have been used for managing the SMI
+ iface via I2C. For this reason these lines can be allocated
+ by using dedicated configuration (in case of there will be a
+ standard PHY transceiver on-board).
+ */
+ pinctrl_rgmii1: rgmii1-0 {
+ st,pins {
+
+ txd0 = <&PIO0 0 ALT1 OUT DE_IO 0 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT DE_IO 0 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT DE_IO 0 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT DE_IO 0 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+ rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
+ rxdv = <&PIO2 0 ALT1 IN DE_IO 0 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN NICLK 500 CLK_A>;
+ clk125 = <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO2 3 ALT4 OUT NICLK 1750 CLK_B>;
+ };
+ };
+
+ pinctrl_rgmii1_mdio: rgmii1-mdio {
+ st,pins {
+ mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+ mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
+ };
+ };
+
+ pinctrl_mii1: mii1 {
+ st,pins {
+ txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&PIO0 7 ALT1 IN BYPASS 1000>;
+
+ mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+
+ };
+
+ pwm1 {
+ pinctrl_pwm1_chan0_default: pwm1-0-default {
+ st,pins {
+ pwm-out = <&PIO3 0 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan1_default: pwm1-1-default {
+ st,pins {
+ pwm-out = <&PIO4 4 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan2_default: pwm1-2-default {
+ st,pins {
+ pwm-out = <&PIO4 6 ALT3 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan3_default: pwm1-3-default {
+ st,pins {
+ pwm-out = <&PIO4 7 ALT3 OUT>;
+ };
+ };
+ };
+
+ };
+
+ pin-controller-front0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ reg = <0x0920f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09200000 0x10000>;
+
+ PIO10: PIO@09200000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO10";
+ };
+ PIO11: PIO@09201000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO11";
+ };
+ PIO12: PIO@09202000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO12";
+ };
+ PIO13: PIO@09203000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO13";
+ };
+ PIO14: PIO@09204000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO14";
+ };
+ PIO15: PIO@09205000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO15";
+ };
+ PIO16: PIO@09206000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x100>;
+ st,bank-name = "PIO16";
+ };
+ PIO17: PIO@09207000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x100>;
+ st,bank-name = "PIO17";
+ };
+ PIO18: PIO@09208000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x100>;
+ st,bank-name = "PIO18";
+ };
+ PIO19: PIO@09209000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x100>;
+ st,bank-name = "PIO19";
+ };
+
+ /* Comms */
+ serial0 {
+ pinctrl_serial0: serial0-0 {
+ st,pins {
+ tx = <&PIO17 0 ALT1 OUT>;
+ rx = <&PIO17 1 ALT1 IN>;
+ };
+ };
+ };
+
+ serial1 {
+ pinctrl_serial1: serial1-0 {
+ st,pins {
+ tx = <&PIO16 0 ALT1 OUT>;
+ rx = <&PIO16 1 ALT1 IN>;
+ };
+ };
+ };
+
+ serial2 {
+ pinctrl_serial2: serial2-0 {
+ st,pins {
+ tx = <&PIO15 0 ALT1 OUT>;
+ rx = <&PIO15 1 ALT1 IN>;
+ };
+ };
+ };
+
+ mmc1 {
+ pinctrl_sd1: sd1-0 {
+ st,pins {
+ sd_clk = <&PIO19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+ sd_cmd = <&PIO19 2 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat0 = <&PIO19 4 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat1 = <&PIO19 5 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat2 = <&PIO19 6 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat3 = <&PIO19 7 ALT5 BIDIR_PU BYPASS 0>;
+ sd_led = <&PIO16 6 ALT6 OUT>;
+ sd_pwren = <&PIO16 7 ALT6 OUT>;
+ sd_cd = <&PIO19 0 ALT6 IN>;
+ sd_wp = <&PIO19 1 ALT6 IN>;
+ };
+ };
+ };
+
+
+ i2c0 {
+ pinctrl_i2c0_default: i2c0-default {
+ st,pins {
+ sda = <&PIO10 6 ALT2 BIDIR>;
+ scl = <&PIO10 5 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_default: i2c1-default {
+ st,pins {
+ sda = <&PIO11 1 ALT2 BIDIR>;
+ scl = <&PIO11 0 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_default: i2c2-default {
+ st,pins {
+ sda = <&PIO15 6 ALT2 BIDIR>;
+ scl = <&PIO15 5 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c3 {
+ pinctrl_i2c3_default: i2c3-default {
+ st,pins {
+ sda = <&PIO18 6 ALT1 BIDIR>;
+ scl = <&PIO18 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0_default: spi0-default {
+ st,pins {
+ mtsr = <&PIO12 6 ALT2 BIDIR>;
+ mrst = <&PIO12 7 ALT2 BIDIR>;
+ scl = <&PIO12 5 ALT2 BIDIR>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ reg = <0x0921f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09210000 0x10000>;
+
+ PIO20: PIO@09210000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO20";
+ };
+ };
+
+ pin-controller-rear {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-rear-pinctrl";
+ st,syscfg = <&syscfg_rear>;
+ reg = <0x0922f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09220000 0x6000>;
+
+ PIO30: gpio@09220000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO30";
+ };
+ PIO31: gpio@09221000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO31";
+ };
+ PIO32: gpio@09222000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO32";
+ };
+ PIO33: gpio@09223000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO33";
+ };
+ PIO34: gpio@09224000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO34";
+ };
+ PIO35: gpio@09225000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO35";
+ };
+
+ i2c4 {
+ pinctrl_i2c4_default: i2c4-default {
+ st,pins {
+ sda = <&PIO30 1 ALT1 BIDIR>;
+ scl = <&PIO30 0 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c5 {
+ pinctrl_i2c5_default: i2c5-default {
+ st,pins {
+ sda = <&PIO34 4 ALT1 BIDIR>;
+ scl = <&PIO34 3 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ usb3 {
+ pinctrl_usb3: usb3-2 {
+ st,pins {
+ usb-oc-detect = <&PIO35 4 ALT1 IN>;
+ usb-pwr-enable = <&PIO35 5 ALT1 OUT>;
+ usb-vbus-valid = <&PIO35 6 ALT1 IN>;
+ };
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_chan0_default: pwm0-0-default {
+ st,pins {
+ pwm-out = <&PIO31 1 ALT1 OUT>;
+ };
+ };
+ };
+
+ };
+
+ pin-controller-flash {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-flash-pinctrl";
+ st,syscfg = <&syscfg_flash>;
+ reg = <0x0923f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09230000 0x3000>;
+
+ PIO40: gpio@09230000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO40";
+ };
+ PIO41: gpio@09231000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO41";
+ };
+ PIO42: gpio@09232000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO42";
+ };
+
+ mmc0 {
+ pinctrl_mmc0: mmc0-0 {
+ st,pins {
+ emmc_clk = <&PIO40 6 ALT1 BIDIR>;
+ emmc_cmd = <&PIO40 7 ALT1 BIDIR_PU>;
+ emmc_d0 = <&PIO41 0 ALT1 BIDIR_PU>;
+ emmc_d1 = <&PIO41 1 ALT1 BIDIR_PU>;
+ emmc_d2 = <&PIO41 2 ALT1 BIDIR_PU>;
+ emmc_d3 = <&PIO41 3 ALT1 BIDIR_PU>;
+ emmc_d4 = <&PIO41 4 ALT1 BIDIR_PU>;
+ emmc_d5 = <&PIO41 5 ALT1 BIDIR_PU>;
+ emmc_d6 = <&PIO41 6 ALT1 BIDIR_PU>;
+ emmc_d7 = <&PIO41 7 ALT1 BIDIR_PU>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
new file mode 100644
index 0000000..2a0566b
--- /dev/null
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-pinctrl.dtsi"
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ intc: interrupt-controller@08761000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+ };
+
+ scu@08760000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x08760000 0x1000>;
+ };
+
+ timer@08760200 {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x08760200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&arm_periph_clk>;
+ };
+
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x08762000 0x1000>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ syscfg_sbc:sbc-syscfg@9620000{
+ compatible = "st,stih407-sbc-syscfg", "syscon";
+ reg = <0x9620000 0x1000>;
+ };
+
+ syscfg_front:front-syscfg@9280000{
+ compatible = "st,stih407-front-syscfg", "syscon";
+ reg = <0x9280000 0x1000>;
+ };
+
+ syscfg_rear:rear-syscfg@9290000{
+ compatible = "st,stih407-rear-syscfg", "syscon";
+ reg = <0x9290000 0x1000>;
+ };
+
+ syscfg_flash:flash-syscfg@92a0000{
+ compatible = "st,stih407-flash-syscfg", "syscon";
+ reg = <0x92a0000 0x1000>;
+ };
+
+ syscfg_sbc_reg:fvdp-lite-syscfg@9600000{
+ compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+ reg = <0x9600000 0x1000>;
+ };
+
+ syscfg_core:core-syscfg@92b0000{
+ compatible = "st,stih407-core-syscfg", "syscon";
+ reg = <0x92b0000 0x1000>;
+ };
+
+ syscfg_lpm:lpm-syscfg@94b5100{
+ compatible = "st,stih407-lpm-syscfg", "syscon";
+ reg = <0x94b5100 0x1000>;
+ };
+
+ serial@9830000{
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial0>;
+ clocks = <&CLK_EXT2F_A9>;
+ };
+
+ serial@9831000{
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0x9831000 0x2c>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial1>;
+ clocks = <&CLK_EXT2F_A9>;
+ };
+
+ serial@9832000{
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0x9832000 0x2c>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2>;
+ clocks = <&CLK_EXT2F_A9>;
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0: serial@9530000 {
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0x9530000 0x2c>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial0>;
+ clocks = <&CLK_SYSIN>;
+ };
+
+ serial@9531000 {
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0x9531000 0x2c>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial1>;
+ clocks = <&CLK_SYSIN>;
+ };
+
+ i2c@9840000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x9840000 0x110>;
+ clocks = <&CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ };
+
+ i2c@9841000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ };
+
+ i2c@9842000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
+ };
+
+ i2c@9843000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+ };
+
+ i2c@9844000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+ };
+
+ i2c@9845000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ reg = <0x9845000 0x110>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+ };
+
+
+ /* SSCs on SBC */
+ i2c@9540000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_SYSIN>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+ };
+
+ i2c@9541000 {
+ compatible = "st,comms-ssc4-i2c";
+ status = "disabled";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_SYSIN>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+ };
+ };
+};
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
