On Thu, Aug 30, 2018 at 08:15:40PM +0530, Vivek Gautam wrote:
> Add bindings doc for Qcom's smmu-v2 implementation.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> Reviewed-by: Tomasz Figa <tfiga@xxxxxxxxxxxx>
> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> .../devicetree/bindings/iommu/arm,smmu.txt | 39 ++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
It would be nice to have an Ack from a DT maintainer on this, since it's
adding new compatible strings...
Will
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index 8a6ffce12af5..a6504b37cc21 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -17,10 +17,16 @@ conditions.
> "arm,mmu-401"
> "arm,mmu-500"
> "cavium,smmu-v2"
> + "qcom,smmu-v2"
>
> depending on the particular implementation and/or the
> version of the architecture implemented.
>
> + Qcom SoCs must contain, as below, SoC-specific compatibles
> + along with "qcom,smmu-v2":
> + "qcom,msm8996-smmu-v2", "qcom,smmu-v2",
> + "qcom,sdm845-smmu-v2", "qcom,smmu-v2".
> +
> - reg : Base address and size of the SMMU.
>
> - #global-interrupts : The number of global interrupts exposed by the
> @@ -71,6 +77,22 @@ conditions.
> or using stream matching with #iommu-cells = <2>, and
> may be ignored if present in such cases.
>
> +- clock-names: List of the names of clocks input to the device. The
> + required list depends on particular implementation and
> + is as follows:
> + - for "qcom,smmu-v2":
> + - "bus": clock required for downstream bus access and
> + for the smmu ptw,
> + - "iface": clock required to access smmu's registers
> + through the TCU's programming interface.
> + - unspecified for other implementations.
> +
> +- clocks: Specifiers for all clocks listed in the clock-names property,
> + as per generic clock bindings.
> +
> +- power-domains: Specifiers for power domains required to be powered on for
> + the SMMU to operate, as per generic power domain bindings.
> +
> ** Deprecated properties:
>
> - mmu-masters (deprecated in favour of the generic "iommus" binding) :
> @@ -137,3 +159,20 @@ conditions.
> iommu-map = <0 &smmu3 0 0x400>;
> ...
> };
> +
> + /* Qcom's arm,smmu-v2 implementation */
> + smmu4: iommu@d00000 {
> + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
> + reg = <0xd00000 0x10000>;
> +
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> + #iommu-cells = <1>;
> + power-domains = <&mmcc MDSS_GDSC>;
> +
> + clocks = <&mmcc SMMU_MDP_AXI_CLK>,
> + <&mmcc SMMU_MDP_AHB_CLK>;
> + clock-names = "bus", "iface";
> + };
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
