Re: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Tony Lindgren <tony@xxxxxxxxxxx> [180927 14:58]:
> * Keerthy <j-keerthy@xxxxxx> [180927 05:00]:
> > On Thursday 27 September 2018 05:01 AM, Tony Lindgren wrote:
> > > The following works for me, does it look OK to you?
> > 
> > This works pretty well with DS0 on am437x-gp-evm. Tested rtc wakeup,
> > wakeup using uart and touch. All of the work well.
> > 
> > https://pastebin.ubuntu.com/p/RJhJJKhJHX/
> 
> OK good to hear and thanks for testing again.
> 
> > Also tested on beaglebone black DS0 works fine. Although there seems to
> > be an additional warning which was not seen before:
> > 
> > "l4-wkup-clkctrl:0008:0: failed to disable"
> > 
> > log: https://pastebin.ubuntu.com/p/Ns2WRdVkXS/
> > 
> > Also the above warning is present without/with this patch on [0].
> > No such warnings on am4 though.
> 
> OK. For am335x I'll post an updated version of the am335x
> changes to fix the gpio dbck offset.

FYI I have pushed updated patches into a new temporary test
branch omap-for-v4.20/dt-ti-sysc-tmp-testing-v2 with initial
dra7 dts changes too.

Regards,

Tony



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux