We need to detect timer and gpio on dra7 because of the
SYSC_QUIRK_LEGACY_IDLE flag for suspend and resume.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/bus/ti-sysc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -869,7 +869,7 @@ struct sysc_revision_quirk {
static const struct sysc_revision_quirk sysc_revision_quirks[] = {
/* These drivers need to be fixed to not use pm_runtime_irq_safe() */
- SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffff0fff,
+ SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffff00ff,
SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_OPT_CLKS_IN_RESET),
SYSC_QUIRK("mmu", 0, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
@@ -884,7 +884,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
/* Some timers on omap4 and later */
- SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffffffff,
+ SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x50002100, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff,
SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
--
2.19.0
