On Mon, Sep 24, 2018 at 11:55:30AM +0200, Thierry Reding wrote:
> On Mon, Sep 24, 2018 at 03:41:39AM +0300, Dmitry Osipenko wrote:
> > Splitting GART and Memory Controller wasn't a good decision that was made
> > back in the day. Given that the GART driver wasn't ever been used by
> > anything in the kernel, we decided that it will be better to correct the
> > mistakes of the past and merge two bindings into a single one. As a result
> > there is a DT ABI change for the Memory Controller that allows not to
> > break newer kernels using older DT and not to break older kernels using
> > newer DT, that is done by changing the 'compatible' of the node to
> > 'tegra20-mc-gart' and adding a new-required clock property. The new clock
> > property also puts the tegra20-mc binding in line with the bindings of the
> > later Tegra generations.
> >
> > Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> > ---
> > .../bindings/iommu/nvidia,tegra20-gart.txt | 14 ----------
> > .../memory-controllers/nvidia,tegra20-mc.txt | 27 +++++++++++++------
> > 2 files changed, 19 insertions(+), 22 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt
> >
> > diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt
> > deleted file mode 100644
> > index 099d9362ebc1..000000000000
> > --- a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt
> > +++ /dev/null
> > @@ -1,14 +0,0 @@
> > -NVIDIA Tegra 20 GART
> > -
> > -Required properties:
> > -- compatible: "nvidia,tegra20-gart"
> > -- reg: Two pairs of cells specifying the physical address and size of
> > - the memory controller registers and the GART aperture respectively.
> > -
> > -Example:
> > -
> > - gart {
> > - compatible = "nvidia,tegra20-gart";
> > - reg = <0x7000f024 0x00000018 /* controller registers */
> > - 0x58000000 0x02000000>; /* GART aperture */
> > - };
> > diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
> > index 7d60a50a4fa1..e55328237df4 100644
> > --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
> > +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
> > @@ -1,26 +1,37 @@
> > NVIDIA Tegra20 MC(Memory Controller)
> >
> > Required properties:
> > -- compatible : "nvidia,tegra20-mc"
> > -- reg : Should contain 2 register ranges(address and length); see the
> > - example below. Note that the MC registers are interleaved with the
> > - GART registers, and hence must be represented as multiple ranges.
> > +- compatible : "nvidia,tegra20-mc-gart"
> > +- reg : Should contain 2 register ranges: physical base address and length of
> > + the controller's registers and the GART aperture respectively.
>
> Couldn't we have achieved the same thing by adding a reg-names property
> instead of using a different compatible string? After all we only change
> what information the DT provides, but the device is still a "tegra20-mc"
> device.
Yes, if we were adding a reg field, but we're changing what the 2 reg
fields contain, so I think a new compatible is best.
Rob
