On 03/07/2014 11:15 AM, George Cherian wrote: > Add nodes for 2 instances each of > - ocp2scp > - USB PHY control module > - USB PHY > - dwc3_omap > - USB > > for AM43xx. > > Signed-off-by: George Cherian <george.cherian@xxxxxx> Acked-by: Roger Quadros <rogerq@xxxxxx> cheers, -roger > --- > arch/arm/boot/dts/am4372.dtsi | 95 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 95 insertions(+) > > diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi > index 5a7cc38..fdcdf1b 100644 > --- a/arch/arm/boot/dts/am4372.dtsi > +++ b/arch/arm/boot/dts/am4372.dtsi > @@ -698,6 +698,101 @@ > <&edma 11>; > dma-names = "tx", "rx"; > }; > + > + am43xx_control_usb2phy1: control-phy@44e10620 { > + compatible = "ti,control-phy-usb2-am437"; > + reg = <0x44e10620 0x4>; > + reg-names = "power"; > + }; > + > + am43xx_control_usb2phy2: control-phy@0x44e10628 { > + compatible = "ti,control-phy-usb2-am437"; > + reg = <0x44e10628 0x4>; > + reg-names = "power"; > + }; > + > + ocp2scp0: ocp2scp@483a8000 { > + compatible = "ti,omap-ocp2scp"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + ti,hwmods = "ocp2scp0"; > + > + usb2_phy1: phy@483a8000 { > + compatible = "ti,am437x-usb2"; > + reg = <0x483a8000 0x8000>; > + ctrl-module = <&am43xx_control_usb2phy1>; > + clocks = <&clk_32768_ck>, > + <&usb_otg_ss0_refclk960m>; > + clock-names = "wkupclk", "refclk"; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + }; > + > + ocp2scp1: ocp2scp@483e8000 { > + compatible = "ti,omap-ocp2scp"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + ti,hwmods = "ocp2scp1"; > + > + usb2_phy2: phy@483e8000 { > + compatible = "ti,am437x-usb2"; > + reg = <0x483e8000 0x8000>; > + ctrl-module = <&am43xx_control_usb2phy2>; > + clocks = <&clk_32768_ck>, > + <&usb_otg_ss1_refclk960m>; > + clock-names = "wkupclk", "refclk"; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + }; > + > + dwc3_1: omap_dwc3@48380000 { > + compatible = "ti,am437x-dwc3"; > + ti,hwmods = "usb_otg_ss0"; > + reg = <0x48380000 0x10000>; > + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <1>; > + ranges; > + > + usb1: usb@48390000 { > + compatible = "synopsys,dwc3"; > + reg = <0x48390000 0x17000>; > + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usb2_phy1>; > + phy-names = "usb2-phy"; > + maximum-speed = "high-speed"; > + dr_mode = "otg"; > + status = "disabled"; > + }; > + }; > + > + dwc3_2: omap_dwc3@483c0000 { > + compatible = "ti,am437x-dwc3"; > + ti,hwmods = "usb_otg_ss1"; > + reg = <0x483c0000 0x10000>; > + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <1>; > + ranges; > + > + usb2: usb@483d0000 { > + compatible = "synopsys,dwc3"; > + reg = <0x483d0000 0x17000>; > + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usb2_phy2>; > + phy-names = "usb2-phy"; > + maximum-speed = "high-speed"; > + dr_mode = "otg"; > + status = "disabled"; > + }; > + }; > + > }; > }; > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html