Add XHCI, EHCI and OHCI drivers for Broadcom STB SoCs. These drivers depend on getting access to the new Broadcom STB USB PHY driver through a device-tree phandle and will fail if the driver is not available. Al Cooper (5): dt-bindings: Add Broadcom STB OHCI, EHCI and XHCI binding document usb: host: Add OHCI driver for Broadcom STB SoCs usb: host: Add EHCI driver for Broadcom STB SoCs usb: host: Add XHCI driver for Broadcom STB SoCs usb: host: Enable building of new Broadcom STB USB drivers .../devicetree/bindings/usb/brcm,ehci-brcm.txt | 22 ++ .../devicetree/bindings/usb/brcm,ohci-brcm.txt | 22 ++ .../devicetree/bindings/usb/brcm,xhci-brcm.txt | 23 ++ MAINTAINERS | 9 + drivers/usb/host/Kconfig | 27 ++ drivers/usb/host/Makefile | 7 + drivers/usb/host/ehci-brcm.c | 304 +++++++++++++++++++++ drivers/usb/host/ohci-brcm.c | 204 ++++++++++++++ drivers/usb/host/xhci-brcm.c | 294 ++++++++++++++++++++ 9 files changed, 912 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/brcm,ehci-brcm.txt create mode 100644 Documentation/devicetree/bindings/usb/brcm,ohci-brcm.txt create mode 100644 Documentation/devicetree/bindings/usb/brcm,xhci-brcm.txt create mode 100644 drivers/usb/host/ehci-brcm.c create mode 100644 drivers/usb/host/ohci-brcm.c create mode 100644 drivers/usb/host/xhci-brcm.c -- 1.9.0.138.g2de3478
