Re: [PATCH v11 1/2] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 26, 2018 at 01:19:34PM +0300, Laurent Pinchart wrote:
> > +Endpoint node properties for CSI1
> > +---------------------------------
> 
> Should you list the CSI0 properties as well ? As the driver in patch 2/2 
> doesn't support the CSI-2 interface I assume you have left out CSI0 for now, 
> but it should still be listed in the bindings. I'm fine with fixing this as a 
> follow-up patch to avoid missing the v4.20 merge window, but if you end up 
> resubmitting the series, could you please address the problem ?

That driver is not available, and the documentation isn't either, so
there's no easy way to tell which properties are going to be needed
before doing the actual work of reverse engineering it and writing a
driver for it. Unfortunately...

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux