On Thu, Sep 13, 2018 at 01:12:29PM -0500, Rob Herring wrote: > dtc has new checks for SPI buses. Fix the warnings in node names and > unit-addresses. > > There's over 100 warnings for FSL boards, a few examples: > > arch/arm/boot/dts/imx28-duckbill-2-spi.dtb: Warning (spi_bus_bridge): /apb@80000000/apbh@80000000/ssp@80014000: node name for SPI buses should be 'spi' > arch/arm/boot/dts/imx53-ppd.dtb: Warning (spi_bus_bridge): /soc/aips@50000000/spba@50000000/ecspi@50010000: node name for SPI buses should be 'spi' > arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (spi_bus_reg): /soc/aips-bus@2000000/spba-bus@2000000/spi@2014000/mcp251x@1: SPI bus unit address format error, expected "0" > > Cc: Shawn Guo <shawnguo@xxxxxxxxxx> > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> > Cc: Fabio Estevam <fabio.estevam@xxxxxxx> > Cc: NXP Linux Team <linux-imx@xxxxxxx> > Cc: Li Yang <leoyang.li@xxxxxxx> > Cc: Stefan Agner <stefan@xxxxxxxx> > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> Applied, thanks.
