Re: [PATCH v2 0/5] Meson8b: add support for the Endless Mini EC-100

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> writes:

> This series adds support for the "Endless Mini" grapefruit-sized mini PC
> from Endless Mobile, Inc. The internal name of this device is EC-100
> (this can be found for example in the GPL kernel tree which is based on
> Amlogic's 3.10 kernel: [0]).
>
> The board is using a Meson8b (S805) SoC with various peripherals.
> The biggest difference compared to boards which are based on Amlogic's
> reference designs is that this board comes with an embedded micro-
> controller called "EC" which makes the system LED pulse during boot
> and allows powering off the board. It also comes with a 10/100 Mbit/s
> Ethernet port and one USB host port.
> There are two variants:
> - 2GB RAM, 32GB storage, 802.11bgn and Bluetooth 4.0
> - 1GB RAM, 24GB storage, neither wifi nor Bluetooth
>
> This series contains support for the new board as well as supporting
> patches for the new vendor prefix and the pin definitions in
> meson8b.dtsi so various peripherals can be enabled.

Applied to v4.20/dt,

Thanks,

Kevin



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux