Re: [PATCH v2 2/2] PCI: controller: dwc: add UniPhier PCIe host controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25/09/2018 17:14, Lorenzo Pieralisi wrote:
> [+Gustavo, please have a look at INTX/MSI management]
> 
> On Thu, Sep 06, 2018 at 06:40:32PM +0900, Kunihiko Hayashi wrote:
>> This introduces specific glue layer for UniPhier platform to support
>> PCIe host controller that is based on the DesignWare PCIe core, and
>> this driver supports Root Complex (host) mode.
> 
> Please read this thread and apply it to next versions:
> 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__marc.info_-3Fl-3Dlinux-2Dpci-26m-3D150905742808166-26w-3D2&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=bkWxpLoW-f-E3EdiDCCa0_h0PicsViasSlvIpzZvPxs&m=H8UNDDUGQnQnqfWr4CBios689dJcjxu4qeTTRGulLmU&s=CgcXc_2LThyOpW-4bCriJNo9H1lzROEdy_cG9p-Y5hU&e=
> 
> [...]
> 
>> +static int uniphier_pcie_link_up(struct dw_pcie *pci)
>> +{
>> +	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
>> +	u32 val, mask;
>> +
>> +	val = readl(priv->base + PCL_STATUS_LINK);
>> +	mask = PCL_RDLH_LINK_UP | PCL_XMLH_LINK_UP;
>> +
>> +	return (val & mask) == mask;
>> +}
>> +
>> +static int uniphier_pcie_establish_link(struct dw_pcie *pci)
>> +{
>> +	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
>> +	int ret;
>> +
>> +	if (dw_pcie_link_up(pci))
>> +		return 0;
>> +
>> +	uniphier_pcie_ltssm_enable(priv);
>> +
>> +	ret = dw_pcie_wait_for_link(pci);
>> +	if (ret == -ETIMEDOUT) {
>> +		dev_warn(pci->dev, "Link not up\n");
>> +		ret = 0;
> 
> So if the link is not up we warn, return and all is fine ?
> 
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static void uniphier_pcie_stop_link(struct dw_pcie *pci)
>> +{
>> +	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
>> +
>> +	uniphier_pcie_ltssm_disable(priv);
>> +}
>> +
>> +static int uniphier_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
>> +				  irq_hw_number_t hwirq)
>> +{
>> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
>> +	irq_set_chip_data(irq, domain->host_data);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct irq_domain_ops uniphier_intx_domain_ops = {
>> +	.map = uniphier_pcie_intx_map,
>> +};
> 
> I looped in Gustavo since this is not how I expect INTX management
> should be done. I do not think there is a DWC INTX generic layer
> but I think drivers/pci/controller/dwc/pci-keystone-dw.c is how
> it has to be done.
> 
>> +
>> +static int uniphier_pcie_init_irq_domain(struct pcie_port *pp)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
>> +	struct device_node *np = pci->dev->of_node;
>> +	struct device_node *np_intc = of_get_next_child(np, NULL);
>> +
>> +	if (!np_intc) {
>> +		dev_err(pci->dev, "Failed to get child node\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	priv->irq_domain = irq_domain_add_linear(np_intc, PCI_NUM_INTX,
>> +						 &uniphier_intx_domain_ops,
>> +						 pp);
>> +	if (!priv->irq_domain) {
>> +		dev_err(pci->dev, "Failed to get INTx domain\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void uniphier_pcie_irq_enable(struct uniphier_pcie_priv *priv)
>> +{
>> +	writel(PCL_RCV_INT_ALL_ENABLE, priv->base + PCL_RCV_INT);
>> +	writel(PCL_RCV_INTX_ALL_ENABLE, priv->base + PCL_RCV_INTX);
>> +}
>> +
>> +static void uniphier_pcie_irq_disable(struct uniphier_pcie_priv *priv)
>> +{
>> +	writel(0, priv->base + PCL_RCV_INT);
>> +	writel(0, priv->base + PCL_RCV_INTX);
>> +}
> 
>> +
>> +static irqreturn_t uniphier_pcie_irq_handler(int irq, void *arg)
> 
> This should not be an IRQ handler (and we should not use
> devm_request_irq() for the multiplexed IRQ line), it is a chained
> interrupt controller configuration and should be managed by an IRQ
> chain, again the way keystone does it seems reasonable to me.
> 
>> +{
>> +	struct uniphier_pcie_priv *priv = arg;
>> +	struct dw_pcie *pci = &priv->pci;
>> +	u32 val;
>> +
>> +	/* INT for debug */
>> +	val = readl(priv->base + PCL_RCV_INT);
>> +
>> +	if (val & PCL_CFG_BW_MGT_STATUS)
>> +		dev_dbg(pci->dev, "Link Bandwidth Management Event\n");
>> +	if (val & PCL_CFG_LINK_AUTO_BW_STATUS)
>> +		dev_dbg(pci->dev, "Link Autonomous Bandwidth Event\n");
>> +	if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
>> +		dev_dbg(pci->dev, "Root Error\n");
>> +	if (val & PCL_CFG_PME_MSI_STATUS)
>> +		dev_dbg(pci->dev, "PME Interrupt\n");
>> +
>> +	writel(val, priv->base + PCL_RCV_INT);
>> +
>> +	/* INTx */
>> +	val = readl(priv->base + PCL_RCV_INTX);
>> +
>> +	if (val & PCL_RADM_INTA_STATUS)
>> +		generic_handle_irq(irq_find_mapping(priv->irq_domain, 0));
>> +	if (val & PCL_RADM_INTB_STATUS)
>> +		generic_handle_irq(irq_find_mapping(priv->irq_domain, 1));
>> +	if (val & PCL_RADM_INTC_STATUS)
>> +		generic_handle_irq(irq_find_mapping(priv->irq_domain, 2));
>> +	if (val & PCL_RADM_INTD_STATUS)
>> +		generic_handle_irq(irq_find_mapping(priv->irq_domain, 3));
> 
> Nit: Do you really need 4 if statements to handle INTX ?
> 
>> +
>> +	writel(val, priv->base + PCL_RCV_INTX);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t uniphier_pcie_msi_irq_handler(int irq, void *arg)
>> +{
>> +	struct pcie_port *pp = arg;
>> +
>> +	return dw_handle_msi_irq(pp);
>> +}
> 
> This IRQ handler must be removed, the MSI irq is handled by dwc core.
> 
>> +static int uniphier_pcie_host_init(struct pcie_port *pp)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +	int ret;
>> +
>> +	dw_pcie_setup_rc(pp);
>> +	ret = uniphier_pcie_establish_link(pci);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (IS_ENABLED(CONFIG_PCI_MSI))
>> +		dw_pcie_msi_init(pp);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dw_pcie_host_ops uniphier_pcie_host_ops = {
>> +	.host_init = uniphier_pcie_host_init,
>> +};
>> +
>> +static int uniphier_add_pcie_port(struct uniphier_pcie_priv *priv,
>> +				  struct platform_device *pdev)
>> +{
>> +	struct dw_pcie *pci = &priv->pci;
>> +	struct pcie_port *pp = &pci->pp;
>> +	struct device *dev = &pdev->dev;
>> +	int ret;
>> +
>> +	pp->root_bus_nr = -1;
> 
> Useless initialization, remove it.
> 
> (ie dw_pcie_host_init() initializes root_bus_nr for you).
> 
>> +	pp->ops = &uniphier_pcie_host_ops;
>> +
>> +	pp->irq = platform_get_irq_byname(pdev, "intx");
>> +	if (pp->irq < 0) {
>> +		dev_err(dev, "Failed to get intx irq\n");
>> +		return pp->irq;
>> +	}
>> +
>> +	ret = devm_request_irq(dev, pp->irq, uniphier_pcie_irq_handler,
>> +			       IRQF_SHARED, "pcie", priv);
> 
> This is wrong, you should set-up a chained IRQ for INTX.
> 
> I *think* that
> 
> ks_pcie_setup_interrupts()
> 
> is a good example to start with but I wonder whether it is worth
> generalizing the INTX approach to designware as a whole as it was
> done for MSIs.
> 
> Thoughts ?

>From what I understood this is for legacy IRQ, right?
Like you (Lorenzo) said there is 2 drivers (pci-keystone-dw.c and pci-dra7xx.c)
that uses it and can be use as a template for handling this type of interrupts.

We can try to pass some kind of generic INTX function to the DesignWare host
library to handling this, but this will require some help from keystone and
dra7xx maintainers, since my setup doesn't have legacy IRQ HW support.

> 
>> +	if (ret) {
>> +		dev_err(dev, "Failed to request irq %d\n", pp->irq);
>> +		return ret;
>> +	}
>> +
>> +	ret = uniphier_pcie_init_irq_domain(pp);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
>> +		if (pp->msi_irq < 0)
>> +			return pp->msi_irq;
>> +
>> +		ret = devm_request_irq(dev, pp->msi_irq,
>> +				       uniphier_pcie_msi_irq_handler,
>> +				       IRQF_SHARED, "pcie-msi", pp);
> 
> No. With MSI management in DWC core all you need to do is initializing
> pp->msi_irq.
> 
> Lorenzo
> 
>> +		if (ret) {
>> +			dev_err(dev, "failed to request msi_irq %d\n",
>> +				pp->msi_irq);
>> +			return ret;
>> +		}
>> +	}
>> +
>> +	ret = dw_pcie_host_init(pp);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to initialize host (%d)\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int uniphier_pcie_host_enable(struct uniphier_pcie_priv *priv)
>> +{
>> +	int ret;
>> +
>> +	ret = clk_prepare_enable(priv->clk);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = reset_control_deassert(priv->rst);
>> +	if (ret)
>> +		goto out_clk_disable;
>> +
>> +	uniphier_pcie_init_rc(priv);
>> +
>> +	ret = phy_init(priv->phy);
>> +	if (ret)
>> +		goto out_rst_assert;
>> +
>> +	ret = uniphier_pcie_wait_rc(priv);
>> +	if (ret)
>> +		goto out_phy_exit;
>> +
>> +	uniphier_pcie_irq_enable(priv);
>> +
>> +	return 0;
>> +
>> +out_phy_exit:
>> +	phy_exit(priv->phy);
>> +out_rst_assert:
>> +	reset_control_assert(priv->rst);
>> +out_clk_disable:
>> +	clk_disable_unprepare(priv->clk);
>> +
>> +	return ret;
>> +}
>> +
>> +static void uniphier_pcie_host_disable(struct uniphier_pcie_priv *priv)
>> +{
>> +	uniphier_pcie_irq_disable(priv);
>> +	phy_exit(priv->phy);
>> +	reset_control_assert(priv->rst);
>> +	clk_disable_unprepare(priv->clk);
>> +}
>> +
>> +static const struct dw_pcie_ops dw_pcie_ops = {
>> +	.start_link = uniphier_pcie_establish_link,
>> +	.stop_link = uniphier_pcie_stop_link,
>> +	.link_up = uniphier_pcie_link_up,
>> +};
>> +
>> +static int uniphier_pcie_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct uniphier_pcie_priv *priv;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	priv->pci.dev = dev;
>> +	priv->pci.ops = &dw_pcie_ops;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
>> +	priv->pci.dbi_base = devm_pci_remap_cfg_resource(dev, res);
>> +	if (IS_ERR(priv->pci.dbi_base))
>> +		return PTR_ERR(priv->pci.dbi_base);
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "link");
>> +	priv->base = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(priv->base))
>> +		return PTR_ERR(priv->base);
>> +
>> +	priv->clk = devm_clk_get(dev, NULL);
>> +	if (IS_ERR(priv->clk))
>> +		return PTR_ERR(priv->clk);
>> +
>> +	priv->rst = devm_reset_control_get_shared(dev, NULL);
>> +	if (IS_ERR(priv->rst))
>> +		return PTR_ERR(priv->rst);
>> +
>> +	priv->phy = devm_phy_optional_get(dev, "pcie-phy");
>> +	if (IS_ERR(priv->phy))
>> +		return PTR_ERR(priv->phy);
>> +
>> +	platform_set_drvdata(pdev, priv);
>> +
>> +	ret = uniphier_pcie_host_enable(priv);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return uniphier_add_pcie_port(priv, pdev);
>> +}
>> +
>> +static int uniphier_pcie_remove(struct platform_device *pdev)
>> +{
>> +	struct uniphier_pcie_priv *priv = platform_get_drvdata(pdev);
>> +
>> +	uniphier_pcie_host_disable(priv);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id uniphier_pcie_match[] = {
>> +	{ .compatible = "socionext,uniphier-pcie", },
>> +	{ /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, uniphier_pcie_match);
>> +
>> +static struct platform_driver uniphier_pcie_driver = {
>> +	.probe  = uniphier_pcie_probe,
>> +	.remove = uniphier_pcie_remove,
>> +	.driver = {
>> +		.name = "uniphier-pcie",
>> +		.of_match_table = uniphier_pcie_match,
>> +	},
>> +};
>> +builtin_platform_driver(uniphier_pcie_driver);
>> +
>> +MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("UniPhier PCIe host controller driver");
>> +MODULE_LICENSE("GPL v2");
>> -- 
>> 2.7.4
>>
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux