This patch adds ELF definition and module relocate codes.
Signed-off-by: Guo Ren <ren_guo@xxxxxxxxx>
---
arch/csky/include/asm/elf.h | 150 ++++++++++++++++++++++++++++++++++++++++++++
arch/csky/kernel/module.c | 83 ++++++++++++++++++++++++
2 files changed, 233 insertions(+)
create mode 100644 arch/csky/include/asm/elf.h
create mode 100644 arch/csky/kernel/module.c
diff --git a/arch/csky/include/asm/elf.h b/arch/csky/include/asm/elf.h
new file mode 100644
index 0000000..7f40a57
--- /dev/null
+++ b/arch/csky/include/asm/elf.h
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#ifndef __ASMCSKY_ELF_H
+#define __ASMCSKY_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <abi/regdef.h>
+
+#define ELF_ARCH 252
+
+/* CSKY Relocations */
+#define R_CSKY_NONE 0
+#define R_CSKY_32 1
+#define R_CSKY_PCIMM8BY4 2
+#define R_CSKY_PCIMM11BY2 3
+#define R_CSKY_PCIMM4BY2 4
+#define R_CSKY_PC32 5
+#define R_CSKY_PCRELJSR_IMM11BY2 6
+#define R_CSKY_GNU_VTINHERIT 7
+#define R_CSKY_GNU_VTENTRY 8
+#define R_CSKY_RELATIVE 9
+#define R_CSKY_COPY 10
+#define R_CSKY_GLOB_DAT 11
+#define R_CSKY_JUMP_SLOT 12
+#define R_CSKY_ADDR_HI16 24
+#define R_CSKY_ADDR_LO16 25
+#define R_CSKY_PCRELJSR_IMM26BY2 40
+
+typedef unsigned long elf_greg_t;
+
+typedef struct user_fp elf_fpregset_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+#define ELF_CLASS ELFCLASS32
+#define ELF_PLAT_INIT(_r, load_addr) _r->a0 = 0
+
+#ifdef __cskyBE__
+#define ELF_DATA ELFDATA2MSB
+#else
+#define ELF_DATA ELFDATA2LSB
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0x0UL
+
+/* The member sort in array pr_reg[x] is pc, r1, r0, psr, r2, r3,r4,
+ r5, r6...... Because GDB difine */
+#if defined(__CSKYABIV2__)
+ #define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ pr_reg[0] = regs->pc; \
+ pr_reg[1] = regs->a1; \
+ pr_reg[2] = regs->a0; \
+ pr_reg[3] = regs->sr; \
+ pr_reg[4] = regs->a2; \
+ pr_reg[5] = regs->a3; \
+ pr_reg[6] = regs->regs[0]; \
+ pr_reg[7] = regs->regs[1]; \
+ pr_reg[8] = regs->regs[2]; \
+ pr_reg[9] = regs->regs[3]; \
+ pr_reg[10] = regs->regs[4]; \
+ pr_reg[11] = regs->regs[5]; \
+ pr_reg[12] = regs->regs[6]; \
+ pr_reg[13] = regs->regs[7]; \
+ pr_reg[14] = regs->regs[8]; \
+ pr_reg[15] = regs->regs[9]; \
+ pr_reg[16] = regs->usp; \
+ pr_reg[17] = regs->lr; \
+ pr_reg[18] = regs->exregs[0]; \
+ pr_reg[19] = regs->exregs[1]; \
+ pr_reg[20] = regs->exregs[2]; \
+ pr_reg[21] = regs->exregs[3]; \
+ pr_reg[22] = regs->exregs[4]; \
+ pr_reg[23] = regs->exregs[5]; \
+ pr_reg[24] = regs->exregs[6]; \
+ pr_reg[25] = regs->exregs[7]; \
+ pr_reg[26] = regs->exregs[8]; \
+ pr_reg[27] = regs->exregs[9]; \
+ pr_reg[28] = regs->exregs[10]; \
+ pr_reg[29] = regs->exregs[11]; \
+ pr_reg[30] = regs->exregs[12]; \
+ pr_reg[31] = regs->exregs[13]; \
+ pr_reg[32] = regs->exregs[14]; \
+ pr_reg[33] = regs->tls;
+#else
+ #define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ pr_reg[0] = regs->pc; \
+ pr_reg[1] = regs->regs[9]; \
+ pr_reg[2] = regs->usp; \
+ pr_reg[3] = regs->sr; \
+ pr_reg[4] = regs->a0; \
+ pr_reg[5] = regs->a1; \
+ pr_reg[6] = regs->a2; \
+ pr_reg[7] = regs->a3; \
+ pr_reg[8] = regs->regs[0]; \
+ pr_reg[9] = regs->regs[1]; \
+ pr_reg[10] = regs->regs[2]; \
+ pr_reg[11] = regs->regs[3]; \
+ pr_reg[12] = regs->regs[4]; \
+ pr_reg[13] = regs->regs[5]; \
+ pr_reg[14] = regs->regs[6]; \
+ pr_reg[15] = regs->regs[7]; \
+ pr_reg[16] = regs->regs[8]; \
+ pr_reg[17] = regs->lr;
+#endif
+
+/* Similar, but for a thread other than current. */
+struct task_struct;
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(
+ struct linux_binprm *bprm,
+ int uses_interp);
+
+#endif
diff --git a/arch/csky/kernel/module.c b/arch/csky/kernel/module.c
new file mode 100644
index 0000000..d3b2c4c
--- /dev/null
+++ b/arch/csky/kernel/module.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <asm/pgtable.h>
+
+#define IS_BSR32(hi16, lo16) (((hi16) & 0xFC00) == 0xE000)
+#define IS_JSRI32(hi16, lo16) ((hi16) == 0xEAE0)
+#define CHANGE_JSRI_TO_LRW(addr) *(uint16_t *)(addr) = (*(uint16_t *)(addr) & 0xFF9F) | 0x001a; \
+ *((uint16_t *)(addr) + 1) = *((uint16_t *)(addr) + 1) & 0xFFFF
+#define SET_JSR32_R26(addr) *(uint16_t *)(addr) = 0xE8Fa; \
+ *((uint16_t *)(addr) + 1) = 0x0000;
+
+int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec, struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ short * temp;
+#ifdef CONFIG_CPU_CSKYV2
+ uint16_t *location_tmp;
+#endif
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ case R_CSKY_32:
+ /* We add the value into the location given */
+ *location = rel[i].r_addend + sym->st_value;
+ break;
+ case R_CSKY_PC32:
+ /* Add the value, subtract its postition */
+ *location = rel[i].r_addend + sym->st_value
+ - (uint32_t)location;
+ break;
+ case R_CSKY_PCRELJSR_IMM11BY2:
+ break;
+ case R_CSKY_PCRELJSR_IMM26BY2:
+#ifdef CONFIG_CPU_CSKYV2
+ location_tmp = (uint16_t *)location;
+ if (IS_BSR32(*location_tmp, *(location_tmp + 1)))
+ break;
+ else if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) {
+ /* jsri 0x... --> lrw r26, 0x... */
+ CHANGE_JSRI_TO_LRW(location);
+ /* lsli r0, r0 --> jsr r26 */
+ SET_JSR32_R26(location + 1);
+ }
+#endif
+ break;
+ case R_CSKY_ADDR_HI16:
+ temp = ((short *)location) + 1;
+ *temp = (short)((rel[i].r_addend + sym->st_value) >> 16);
+ break;
+ case R_CSKY_ADDR_LO16:
+ temp = ((short *)location) + 1;
+ *temp = (short)((rel[i].r_addend + sym->st_value) & 0xffff);
+ break;
+ default:
+ pr_err("module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
--
2.7.4
