On Mon, Aug 27, 2018 at 08:05:48PM +0200, Stefan Wahren wrote: > This adds a reference to the dts of the Compute Module IO Board V3 in arm, > so we don't need to maintain the content in arm64. > > Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> > --- > arch/arm64/boot/dts/broadcom/Makefile | 3 ++- > arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts | 2 ++ > 2 files changed, 4 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts > > diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile > index 1193a9e..3d98f5f 100644 > --- a/arch/arm64/boot/dts/broadcom/Makefile > +++ b/arch/arm64/boot/dts/broadcom/Makefile > @@ -1,6 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0 > dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ > - bcm2837-rpi-3-b-plus.dtb > + bcm2837-rpi-3-b-plus.dtb \ > + bcm2837-rpi-cm3-io3.dts This should be the .dtb file, not the .dts. At compile time make is not going to complain, because it finds the file, but make dtbs_install will fail. I'm not sure if you want a patch or if you can fix it in your public tree. Found out while trying to install the dtbs from linux-next 20180920 Best regards, Liviu > > subdir-y += northstar2 > subdir-y += stingray > diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts > new file mode 100644 > index 0000000..b1c4ab2 > --- /dev/null > +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts > @@ -0,0 +1,2 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include "arm/bcm2837-rpi-cm3-io3.dts" > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
