From: Thierry Reding <treding@xxxxxxxxxx>
The IRQ core code refers to the interrupt type by that name, whereas the
term flow is almost never used. Some GPIO controllers use the term
flow_type, but it is most consistent to just go with the IRQ core
terminology.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
drivers/gpio/gpio-tegra186.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 9d0292c8a199..66ec38bb7954 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -279,7 +279,7 @@ static void tegra186_irq_unmask(struct irq_data *data)
writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
}
-static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow)
+static int tegra186_irq_set_type(struct irq_data *data, unsigned int type)
{
struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
void __iomem *base;
@@ -293,7 +293,7 @@ static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow)
value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK;
value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL;
- switch (flow & IRQ_TYPE_SENSE_MASK) {
+ switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_NONE:
break;
@@ -325,7 +325,7 @@ static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow)
writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
- if ((flow & IRQ_TYPE_EDGE_BOTH) == 0)
+ if ((type & IRQ_TYPE_EDGE_BOTH) == 0)
irq_set_handler_locked(data, handle_level_irq);
else
irq_set_handler_locked(data, handle_edge_irq);
--
2.19.0
