Broadcom BCM63xx DSL SoCs have a different UART implementation for which we need specially crafted low-level debug assembly code to support. Add support for this using the standard definitions provided in include/linux/serial_bcm63xx.h (shared with their MIPS counterparts). Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- arch/arm/Kconfig.debug | 18 ++++++++++++++++-- arch/arm/include/debug/bcm63xxx.S | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+), 2 deletions(-) create mode 100644 arch/arm/include/debug/bcm63xxx.S diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c23f52445308..a1a4281dc4b9 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -117,6 +117,11 @@ choice mobile SoCs in the Kona family of chips (e.g. bcm28155, bcm11351, etc...) + config DEBUG_BCM63XX + bool "Kernel low-level debugging on BCM63XX UART" + depends on ARCH_BCM_63XX + select DEBUG_UART_BCM63XX + config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" depends on ARCH_BERLIN @@ -985,6 +990,7 @@ config DEBUG_LL_INCLUDE default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 + default "debug/bcm63xxx.S" if DEBUG_UART_BCM63XX default "mach/debug-macro.S" # Compatibility options for PL01x @@ -1004,6 +1010,10 @@ config DEBUG_UART_8250 ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC +# Compatibility options for BCM63xx +config DEBUG_UART_BCM63XX + def_bool ARCH_BCM_63XX + config DEBUG_UART_PHYS hex "Physical base address of debug UART" default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 @@ -1059,10 +1069,12 @@ config DEBUG_UART_PHYS default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX default 0xfff36000 if DEBUG_HIGHBANK_UART + default 0xfffe8600 if DEBUG_UART_BCM63XX default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_UART_BCM63XX config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1083,6 +1095,7 @@ config DEBUG_UART_VIRT default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX default 0xfd012000 if ARCH_MV78XX0 @@ -1120,7 +1133,8 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_UART_BCM63XX config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/include/debug/bcm63xxx.S b/arch/arm/include/debug/bcm63xxx.S new file mode 100644 index 000000000000..a28fbd1bb5d8 --- /dev/null +++ b/arch/arm/include/debug/bcm63xxx.S @@ -0,0 +1,33 @@ +/* + * Broadcom BCM63xxx low-level UART debug + * + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/serial_bcm63xx.h> + + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm + + .macro senduart, rd, rx + /* word access do not work */ + strb \rd, [\rx, #UART_FIFO_REG] + .endm + + .macro waituart, rd, rx +1001: ldr \rd, [\rx, #UART_IR_REG] + tst \rd, #(1 << UART_IR_TXEMPTY) + beq 1001b + .endm + + .macro busyuart, rd, rx +1002: ldr \rd, [\rx, #UART_IR_REG] + tst \rd, #(1 << UART_IR_TXTRESH) + beq 1002b + .endm -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
